G2A-434A-NAC115 Datasheet, PDF (8/10 Pages) Omron Electronics LLC – Highly Reliable, 4-pole Miniature Relay Ideal for Sequence Control

G2A
Socket Mounting Plates (t = 1.6 mm)
Use any of these plates when mounting two or more Sockets side-by-side
PYP-1 (for Single Socket Mounting)
Two, 3.4-dia. holes ^{72 elliptic holes}
PYP-18 (for Mounting 18 Sockets)
PYP-36 (for Mounting 36 Sockets)
492
27.4 x 17 = 465.8±0.6
13.1
21.6 _27.4
±0.15
4.5
3.4 ^R1.7
72 elliptic holes
492
27.4 x 17 = 465.8±0.6
21.6 27.4
±0.15
4.5
3.4
13.1
R1.7
21.4⁺−00.2
Square
hole
42±0.1
49
28
49
42±0.1
Note: PYP-18 and PYP-36 can be cut to a desired length for
mounting less than 18 or 36 Sockets, respectively.
39.7±0.2
86.4
39.7±0.2
13.1
27.4 x 17 = 465.8±0.6
21.6
Safety Precautions
Refer to Safety Precautions for All Relays.
A DC coil model with a built-in indicator or built-in diode has coil
polarity. Be sure to wire the terminals correctly, otherwise the diode
may be broken or the operating indicator may not be lit. Furthermore,
as a result of the short-circuiting of the built-in diode, the devices in
the circuit may be damaged.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
8