H2C Datasheet, PDF (6/8 Pages) Omron Electronics LLC – Motor Timer

H2C
Mounting Track (Meets DIN EN50022)
PFP-100N/PFP-50N
(see note)
Note: This dimension applied to PFP-50N.
End Plate
PFP-M
PFP-100N2
Twelve, 25 ' 4.5 elliptic holes (see note)
H2C
Note: A total of twelve, 25 x 4.5 elliptic holes are provided with 6
holes cut from each rail end at a pitch of 10 mm between
holes.
PFP-S
H2C (with PF113A)
H2C-F
(See
note)
Note: For a load current of 3 A max., a spacer and an end
plate are not required. For a load current of 6 A, one
spacer or an end plate is required.
Adapter for Flush Mounting
Y92F-30
(See note)
(See
note)
Note:
For a load current of 1 A max., a spacer and an end
plate are not required. For a load current of 3 A max.,
one spacer or an end plate is required. For a load cur-
rent of 6 A max. two spacers or two end plates are re-
quired.
Timer Hold-down Clips
Y92H-2
(for PF085A/PF113A
Connecting Socket)
Y92H-1
(for PL08/PL11
Connecting Socket)
Note: The adapter can be mounted to the timer form any side of
the timer housing since the adapter security notches are
provided on all four sides of the housing.
6