E3M-VG16 Datasheet, PDF (5/7 Pages) Omron Electronics LLC – Great for Irregularities and Lamination

Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
● Designing
Power Supply
A power supply with full- or half-wave rectification cannot be
connected.
● Wiring
Tensile Strength of Cables
The tensile strength of the cable should not exceed 50 N.
● Mounting
Tightening Force
The tightening force applied to the Fiber Unit should not exceed 1.2
N·m.
Mounting the Sensor
If Sensors are mounted face-to-face, make sure that the optical axes
are not in opposition to each other. Otherwise, mutual interference
may result.
● Others
EEPROM Writing Error
An EEPROM error may result if the power supply to the Sensor fails
or the Sensor is influenced by static noise. The threshold indicators
will flash if there is an EEPROM error, in which case perform teaching
and make threshold level settings again.
E3M-V
5