E3M-VG16 Datasheet, PDF (2/7 Pages) Omron Electronics LLC – Great for Irregularities and Lamination

Ratings and Specifications
E3M-V
Item
Model
E3M-VG11
E3M-VG21
E3M-VG16
E3M-VG26
Sensing distance
10 ± 3 mm
Spot size
(horizontal × vertical) *4
1 × 4 mm
4 × 1 mm
1 × 4 mm
4 × 1 mm
Light source
(wavelength)
Green LED (525 nm)
Power supply voltage 10 to 30 VDC including 10% (p.p) ripple
Current consumption 100 mA max.
Control output
Load power supply voltage: 30 VDC max., Load current: Load power supply voltage: 30 VDC max., Load current:
100 mA max. (Residual voltage: 1.2 V max.), NPN open 100 mA max. (Residual voltage: 2 V max.), PNP open col-
collector output
lector output
Remote control input *1
ON: Short-circuit to 0 V or 1.5 V max. (Outflow current 1 mA max.)
OFF: Open or Vcc-1.5 V to Vcc (Leakage current 0.1 mA max.)
ON: Vcc-1.5 V to Vcc (Inlet current 3 mA max.)
OFF: Open or 1.5 V max. (Leakage current 0.1 mA max.)
Remote control output *1
Load power supply voltage: 30 VDC max., Load current: 100 mA max. Load power supply voltage: 30 VDC max., Load current: 100 mA max.
(Residual voltage: 1.2 V max.), NPN open collector output (Residual voltage: 2 V max.), PNP open collector output
Bank selection
2-bank selection (Performed by remote control only. Refer to the remote control function for details.)
Protective circuits
Power supply reverse polarity protection, Load short-circuit protection
Response time
ON: 50 μs max., OFF: 70 μs max.
Sensitivity adjustment Teaching system
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max., Sunlight 10,000 lx max.
Ambient temperature
range
Operating: −20 to 55°C, Storage: −30 to 70°C (with no icing)
Ambient humidity
range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩmin. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance *2 Destruction: 10 to 55 Hz, 1-mm double amplitude or 150 m/s² for 2 hours each in X, Y and Z directions
Shock resistance *3 Destruction: 500 m/s² 3 times each in X, Y and Z directions
Degree of protection IEC 60529 IP67 (with Protective Cover attached)
Connection method M12 Connector
Weight (packed state) Approx. 100 g
Case
Material
Lens
PBT (polybutylene terephthalate)
Mechacrylic resin
Accessories
Instruction manual
*1. A single cable is shared for remote control input and answer-back output.
*2. 0.75-mm double amplitude or 100 m/s² when using a Mounting Bracket.
*3. 300 m/s² when using a Mounting Bracket.
*4. The spot size is measured with the light emitter facing forward and the Sensor body standing vertically.
2