E3S-C Datasheet, PDF (4/10 Pages) Omron Electronics LLC – Oil-resistive, long-distance photoelectric sensor (metal case)

Rating/performance
Sensor type
Through-beam
Retroreflective model
(with M.S.R. function)
Diffuse-reflective
Horizontal E3S-CT11 (-M1J) Horizontal E3S-CR11 (-M1J) Horizontal E3S-CD11 (-M1J) Horizontal E3S-CD12 (-M1J)
Model
Item
Vertical E3S-CT61 (-M1J)
Vertical E3S-CR61 (-M1J) Vertical E3S-CD61 (-M1J) Vertical E3S-CD62 (-M1J)
Sensing distance 30 m
3 m (When using the
E39-R1)
700 mm (White paper 300 x 2 m (White paper 300 x
300 mm)
300 mm)
Standard sensing
object
Opaque, 15dia. min.
Opaque: 75 mm dia. min.
---
Differential distance
---
20% max. of sensing distance
Directional angle
Both emitter and receiver:
3° to 15°
3° to 10°
---
Light source
(wave length)
Infrared LED (880 nm)
Red LED (700 nm)
Infrared LED (880 nm)
Supply
voltage
10 to 30 VDC [ripple (p-p) 10% included]
Current
consumption
Both emitter and receiver:
25 mA max.
40 mA max.
Control output
Load supply voltage 30 VDC max., load current 100 mA max. (residual voltage NPN output: 1.2 V max., PNP out-
put: 2.0 V max.) Open collector output type (NPN/PNP switch selectable) Light-ON/Dark-ON switch selectable
Protective circuits
Reverse polarity protection,
output short-circuit protec-
tion
Reverse polarity protection, output short-circuit protection, mutual interference pre-
vention
Response time
Operation or reset: 1 ms max.
Operation/reset: 2 ms
max. each
Sensitivity
adjustment
Single-turn adjustment
2-turn endless adjuster (with indicator)
Ambient illuminance (on Receiver lens) Incandescent lamp: 5,000 lux max. Sunlight: 10,000 lux max.
Ambient
temperature
Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85%RH, Storage: 35% to 95%RH (with no condensation)
Insulation
resistance
20 M W min. at 500 VDC
Dielectric strength
Vibration resistance
Shock resistance
1,000 VAC at 50/60 Hz 1 minute
10 to 2,000 Hz double amplitude 1.5 mm or 300 m/s² for 0.5 h in each of X, Y, Z directions
1000 m/s² (approx.- l00G) 3 times each in X, Y, and Z directions
Protective structure IEC Standard IP67, NEMA 6P (limited to indoors use) *
Connection method Pre-wired (standard length: 2 m), Junction connector (standard length: 300 mm)
Weight
(Packed state)
About 270 g (pre-wired
type) About 230 g (M12
connector joint type)
About 160 g (pre-wired
type) About 130 g (M12
connector joint type)
About 150 g (pre-wired type) About 110 g (M12 con-
nector joint type)
Case
Zinc diecast
Operation
Ma- _{panel cover}
teri-
al ^Lens
Mounting
Brackets
Polyethyl sulfon
Acrylics
Stainless steel (SUS304)
Accessories
Mounting bracket (with screws), adjusting screwdriver, instruction manual, reflector (Retroreflective model only)
* NEMA (National Electrical Manufacturers Association) Standards
E3S-C
A-149