S8VM03015CD Datasheet, PDF (31/38 Pages) Omron Electronics LLC – Switch Mode Power Supply

■ Other Items Sold Separately
S8VM
Name
Undervoltage Alarm Output Wiring Cable
Signal I/O Connector Terminals and Housing
Set contains ten SPHD-001T-P0.5 Terminals and one PHDR-12VS Housing.
Replacement Fan Unit for 300-W Models
Replacement Fan Unit for 600-W Models
Replacement Fan Unit for a 1,500-W Model
Model
S82Y-VM10H
S82Y-VM30C
S82Y-VM30FAN
S82Y-VM60FAN
S82Y-VM15FAN
Undervoltage Alarm Output Wiring Cable
S82Y-VM10H (for S8VM-05024A@/05024P@/10024A@/10024P@/15024A@/15024P@ Only)
Using the Undervoltage Alarm
Output Wiring Cable
: XHP-3 (Manufactured by JST)
to : AWG24
3,000±50
Note: The signal I/O connector can
be connected in only one
orientation. It cannot be
connected if it is upside down.
■ Signal I/O Connector Terminals and Housing
S82Y-VM30C (for the S8VM-300@@C/600@@C/15224C)
The S82Y-VM30C is used to make a signal I/O connector. Refer to Signal I/O Connector Harness Manufacture Method on page 33 for details.
■ DIN Rail
Note: All units are in millimeters unless otherwise indicated.
Mounting Rail (Material: Aluminum)
PFP-100N
PFP-50N
4.5
7.3±0.15
35±0.3
27±0.15
15 25 ₁₀ 25
25 ₁₀ 25
1,000 (500) *
Mounting Rail (Material: Aluminum)
PFP-100N2
4.5
15(5) *
1
*Values in parentheses
are for the PFP-50N.
16
35±0.3 27 24
29.2
15 25
25
10
1,000
25
25 15
10
1
1.5
Mounting Rail (Order Separately)
End Plate
PFP-M
M4 × 8
pan-head
50 ^screw
10
6.2
1.8
1
35.5 ^35.5
1.8
11.5
10
1.3
M4 spring
4.8
washer
Note: If there is a possibility that the Unit will be subjected to vibration or impact, metallic filings may be generated by abrasion. In this situation, use a
metal DIN Rail. Also, if the Unit may be subjected to sliding to either side, attach an End Plate (Model PFP-M) on each side of the Unit.
31