PYF14S Datasheet, PDF (3/6 Pages) Omron Electronics LLC – Screwless Clamp Terminal Socket

PYFjjS
Accessories (Order seperately)
Unit: mm
J SOCKET BRIDGE
Insulating coating
PYFjjS
1.4 dia. conductor
L
(See note 1.)
Note: 1. The relationship between the model number, the length
L, and the color of the insulating coating is shown in
the following table.
Model number
PYDM-14SR
PYDM-14SB
PYDM-08SR
PYDM-08SB
Length L (mm)
27.5±0.3
19.7±0.3
Color of
insulating
coating
Red
Blue
Red
Blue
2. The insulating coating must be able to withstand a volt-
age of 1,500 V for 1 minute. Use either PE or PA as
the material of the insulating coating.
J PYF14S LEVER
26.5 typ.
21.5 typ.
28 typ.
3. The positions of the ends of the insulating coating must
not vary more than 0.5 mm.
4. The characteristics of the socket bridge are shown in
the following table.
Item
Rated ON current
Rated insulation voltage
Temperature rise
Dielectric strength
Ambient operating
temperature
Characteristic
10 A
250 VAC
35°C max.
1,500 VAC for 1 minute
--55 to 70°C
J PYF08S LEVER
6 typ.
16 typ.
52.5 typ.
29.6 typ.
3 typ.
Installation
J TOOLS
A flat-blade screwdriver should be used to mount the cables.
Applicable Screwdriver
Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Flat-blade, Parallel-tip
4.1 typ.
54.4 typ.
5.4 typ.
32.7 typ.
6.41 typ.
2.5 dia. (3.0 mm max.)
Flat-blade, Flared-tip
Cannot be used.
Examples:
FACOM AEF.2.5 ´ 75E
VESSEL No. 9900-(-)2.5 ´ 75
WAGO 210-119
WIHA 260/2.5 ´ 40
(AEF. 3 ´ 75E)
(No. 9900-(-)3 ´ 100
(260/3 ´ 50)
Note: Chamfering (beveling) the tip of the driver improves insertion when used as an exclusive tool.
3