EESX671P Datasheet, PDF (3/12 Pages) Omron Electronics LLC – Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity.

Ratings and Specifications
EE-SX47/67
Type Standard
L-shaped
T-shaped,
slot center
7 mm
Close-mounting
T-shaped,
slot center
10 mm
F-shaped
R-shaped
NPN
models
PNP
models
Item
Connector
models
EE-SX670
EE-SX670A
EE-SX470
Pre-wired EE-SX670-
models WR
Connector
models
EE-SX670P
EE-SX670R
EE-SX470P
Pre-wired EE-SX670P-
models WR
EE-SX671
EE-SX671A
EE-SX471
EE-SX671-
WR
EE-SX671P
EE-SX671R
EE-SX471P
EE-SX671P-
WR
EE-SX672
EE-SX672A
EE-SX472
EE-SX672-
WR
EE-SX672P
EE-SX672R
EE-SX472P
EE-SX672P-
WR
EE-SX673
EE-SX673A
EE-SX473
EE-SX673-
WR
EE-SX673P
EE-SX673R
EE-SX473P
EE-SX673P-
WR
EE-SX674
EE-SX674A
EE-SX474
EE-SX674-
WR
EE-SX674P
EE-SX674R
EE-SX474P
EE-SX674P-
WR
EE-SX675
EE-SX675-
WR
EE-SX675P
EE-SX675P-
WR
EE-SX676
EE-SX676-
WR
EE-SX676P
EE-SX676P-
WR
EE-SX677
EE-SX677-
WR
EE-SX677P
EE-SX677P-
WR
Sensing distance
Sensing object
Differential distance
Light source
5 mm (slot width)
Opaque: 2 × 0.8 mm min.
0.025 mm
GaAs infrared LED with a peak wavelength of 940 nm
Indicator *1
Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
Supply voltage
5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption
35 mA max. (NPN models), 30 mA max. (PNP models)
Control output
NPN open collector: 5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
OFF current (leakage current): 0.5 mA max.
PNP open collector: 5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
OFF current (leakage current): 0.5 mA max.
Response frequency *2
Ambient illumination
Ambient temperature range
Ambient humidity range
Vibration resistance
Shock resistance
1 kHz min. (3 kHz average)
1,000 lx max. with fluorescent light on the surface of the receiver.
Operating: −25 to +55°C, Storage: −30 to +80°C (with no icing or condensation)
Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation)
Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s²)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529 IP50
Connecting method
Connector Models (direct soldering possible), Pre-wired Models (Standard cable length: 1 m),
Models with Connectors (Standard cable length: 0.1 m)
Wei-
ght
Ma-
teri-
al
Connector models
Pre-wired models
Case
Cover
Emitter/receiver
Approx. 3.1 g Approx. 3 g Approx. 2.4 g Approx. 2.3 g Approx. 3 g Approx. 2.7 g Approx. 2.2 g Approx. 2.2 g
Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 16.8 g Approx. 17.1 g Approx. 18.3 g Approx. 16.9 g Approx. 16.9 g
Polybutylene phthalate (PBT)
Polycarbonate
*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk shown at the right.
Disk
1 mm
2.1 mm
1 mm
t = 0.2 mm
3