D2JW Datasheet, PDF (3/8 Pages) Omron Electronics LLC – Sealed Snap Action Switch

Dimensions
■ Terminals
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
Solder Terminals
Molded Lead Wires
1.3
1
2
0.4
333...999555 3.95
■ Mounting
All switches may be panel mounted using M2.3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.20 to 0.29 N·m.
M2.3 mounting holes
15.3
8.7
300 ± 10
NC (red)
NO (blue)
COM
(black)
5±2
5.3 ± 0.1
4.8± 0.1
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations and dimensions are for models with PCB terminals. Refer to “Terminals” for models with molded lead wires.
3. The operating characteristics are for operation in the A direction( )
Pin Plunger Models
D2JW-011
PT
1.6 dia.
A
OP
2.35
+0.05
–0.025
2.5
+0.05
–0.025
dia.
9.4 _12.3
2.8
1.3
1
2.35
+0.05
–0.025
dia.
2
4.8±0.05 3.95
3.95 3.95
12.7
0.4
5.3±0.1
OF max.
RF min.
PT max.
OT min.
MD max.
OP
250 gf
100 gf
0.6 mm
0.3 mm
0.1 mm
8.1 ± 0.3 mm
Short Hinge Lever Models
D2JW-01K1A1
1.8
PT
7.95
11.5R
A _{0.3 t stainless-steel}
spring lever
OP
6.15
2.35
+0.05
–0.025
2.5
+0.05
–0.025
dia.
9.4 _12.3
2.8
1.3
1
2.35
+0.05
–0.025
dia.
2
4.8±0.05 3.95
3.95 3.95
12.7
3
0.4
5.3 ±0.1
OF max.
RF min.
PT max.
OT min.
MD max.
OP
117 gf
23 gf
5.4 mm
0.7 mm
0.5 mm
8.4 ± 0.8 mm
Sealed Snap Action Switch D2JW 191