S8PE Datasheet, PDF (2/8 Pages) Omron Electronics LLC – Three phase input switch mode Power Supply (DIN-rail mounting, 3-phase input Switch mode Power Supply with a range of 5A to 40A output current)

Specifications
Item
Efficiency
(typical)
Input
Output
Nominal Input Voltage
Nominal Output Current
(Vin = 400 VAC, Pmax)
(Vin = 480 VAC, Pmax)
(Vin = 230 VAC, Pmax)
Voltage range
Frequency
Current (max.)
(Vin = Range min., Pmax)
Power factor (typical)
(Vin = 400 VAC, Pmax)
(Vin = 480 VAC, Pmax)
(Vin = 230 VAC, Pmax)
Leakage current (max.)
(Vin = 400 VAC, Pmax)
(Vin = 480 VAC, Pmax)
(Vin = 230 VAC, Pmax)
Inrush current (max.)
(Pmax) (Note 1)
Voltage adjustment range
Tolerance adjustment accuracy
Ripple & noise (Pmax.)
Load variation influence
Input variation influence
Temperature variation influence
Startup time (max.)
Hold time (min.)
(Vin = 200 VAC, Pmax)
(Vin = 400 VAC, Pmax)
(Vin = 480 VAC, Pmax)
(Vin = 230 VAC, Pmax)
Protection
5A
85%
84%
–
0.5 A
0.58
0.52
–
0.4 mA
0.5 mA
–
30 A
1.7 s
–
21 ms
25 ms
–
Others
Parallel operation
Serial operation
Indicator
Heat radiation
Ambient temperature (Note 2)
Storage temperature
Ambient humidity
Dielectric strength
Insulation resistance
EMC
Approved standards
Life expectancy (Note 3)
Weight
750 g
F: 400...480 VAC
10 A
20 A
88%
88%
–
87%
87%
–
340...766 VAC
1.0 A
1.5 A
40 A
90%
90%
–
5A
–
–
86%
50/60 Hz
2.5 A
1.0 A
J: 200...230 VAC
10 A
20 A
–
–
88%
–
–
89%
180..264 VAC
2.0 A
3.0 A
0.64
0.59
–
0.9 mA
1.1 mA
–
30 A
1.5 s
–
17 ms
26 ms
–
1.0 kg
0.89
0.89
–
–
0.84
0.84
–
–
–
–
0.55
0.55
1.3 mA
1.6 mA
–
40 A
0.7 mA
0.9 mA
–
50 A
–
–
0.3 mA
35 A
–
–
0.4 mA
35 A
1.0 s
22.5..26.4 VDC min.
± 0.5%
200 mV max.
± 2% max.
± 0.5% max.
± 0.01%/°C
0.1 s
0.9 s
1.0 s
–
11 ms
24 ms
–
–
14 ms
26 ms
–
10 ms
–
–
20 ms
4 ms
–
–
10 ms
- Short circuit protection with automatic reset
- Over load protection
- Over voltage protection (Note 4)
Yes (for two units)
Yes (for two units)
Yes (Green LED)
Natural air cooling
-10..60 °C (de-rating: 2%/°C for 50..60 °C)
-25..85 °C
25..85%
500 VAC 50/60 Hz (Output - P.E.)
Comply to EN60950 F: 2.5 kVAC 50/60 Hz (Input - P.E.)
J: 1.5 kVAC 50/60 Hz (Input - P.E.)
500 M Ω min. at 500 VDC: P.E. - Output
EN55022 class A, EN55011 class A, EN50081-2
EN61000-6-2, EN61000-3-2 class A
IEC60950, EN60950, UL60950, CSA22.2-60950
UL508 (Listing), CSA22.2-14, EN50178, EN60204-1
10 years (typical)
2.65 kg
4.75 kg
750 g
1.0 kg
–
–
0.9
–
–
0.7 mA
75 A
1.3 s
4 ms
–
–
8 ms
2.65 kg
Note 1. Measured at 25 °C, and cold start condition. (F: Vin = 480 VAC, J: Vin = 230 VAC, duration < 500 µs)
2. For UL and CSA, -105 to 50 °C (de-rating: 2%/°C for 40-50 °C only for 40 A model).
3. Under the ambient temperature of 40 °C, and a load rate of 50%.
4. Over voltage protection is provided for 5A, 10A and 20A models.
For 40A model, no overvoltage protection is provided.
40 A
–
–
91%
5.0 A
–
–
0.89
–
–
1.4 mA
75 A
0.1 s
5 ms
–
–
13 ms
4.75 kg
L-100 Three phase input switch mode Power Supply S8PE