E2EQ Datasheet, PDF (2/8 Pages) Omron Electronics LLC – A Series of Spatter-resistant Proximity Sensors with a Teflon-coated Metal Housing

Accessories (Order Separately)
Sensor I/O Connectors
Shape
Straight type
Cable length
2m
5m
L type
2m
5m
Straight type
2m
5m
L type
2m
5m
Sensor I/O Connectors
XS2F-D421-DCO-A
XS2F-D421-GCO-A
XS2F-D422-DCO-A
XS2F-D422-GCO-A
XS2F-D421-DA0-A
XS2F-D421-GA0-A
XS2F-D422-DA0-A
XS2F-D422-GA0-A
Applicable proximity sensor models
E2EQ-X#X1-M1J
E2EQ-X#D1-M1GJ
Rating/Performance
Long-distance type
Item
Sensing distance
Model
E2EQ-X4X1
E2EQ-X4X1-M1J
4 mm ±10%
E2EQ-X8X1
E2EQ-X8X1-M1J
8 mm ±10%
E2EQ-X15X1
E2EQ-X15X1-M1J
15 mm ±10%
Setting distance*1
0 to 3.2 mm
0 to 6.4 mm
0 to 12 mm
Differential distance
15% max. of sensing distance
Standard sensing object
(mild steel)
12 x 12 x 1 mm
18 ± 18 ± 1 mm
30 ± 30 ± 1 mm
Response frequency*2
Control
output
Switching
capacity
Residual
voltage*3
1 kHz
3 to 100 mA
0.5 kHz
0.25 kHz
5.0 V max. (under load current of 100 mA with cable length of 2 m)
Operating status (with
sensing object approaching)
C1 models: NO
Protective circuits
Surge absorber, load short-circuit protection
Ambient temperature
Operating: -25°C to 70°C, Storage: -40°C to 85°C (with no icing or condensation)
Temperature influence
±15% max. of sensing distance at 23°C within temperature range
of -40°C to 85°C ±10% max. of sensing distance at 23°C within
temperature range of -25°C to70°C
±15% max. of sensing distance
at 23°C within temperature range
of -25°C to 70°C
Voltage influence
±1% max. of Sensing distance in rated voltage range ±15%.
Shock resistance
Destruction: 1,000 m/s² for 10 times each in X, Y, and Z directions
Connection method
Pre-wired (standard length: 2 m) Connector Extension Models
Weight
(Packed
state)
Pre-wired
Junction
connector
65 g
Approx. 20 g
Approx. 140 g
Approx. 40g
Approx. 190 g
Approx. 90 g
*1. Use within a range where the green indicator is lit.
*2. The response frequencies for DC switching are average values.
*3. Since residual voltage is 5 V, use it after checking interface requirements with the connection devices.
E2EQ
E-33