E3S-2B41 Datasheet, PDF (14/15 Pages) Omron Electronics LLC – Photoelectric Sensor with Built-in Amplifier

E3S
Slit (Order Separately)
E39-S2
10.5
13
1.8
17.9
(16.7)
17.8 ^1.2
E39-S2
*Spacer
Slit
E39-S2
Applicable
Sensors
E3S-2E4
E3S-2E41
Note 1. Three sets of slits are provided:
6.5 x 0.5 mm, 6.5 x 1 mm and 6.5 x
2 mm
2. One set consists of two slits, one
each for the Emitter and Receiver.
E39-S1
8.3
20
2.1
1.2
22.4
23.4
(22.2)
Slit
E39-S1
Applicable
Sensors
E3S-5E4
E3S-5E41
Note 1. Four sets of slits are provided:
11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm,
and 11 x 4 mm
2. One set consists of two slits, one
each for the Emitter and Receiver.
E39-S2
Note: The dimensions in parentheses are for when the Spacer is not used.
*Spacer
* With the E3S-2E4 (41), use the Spacer as shown in the figure above so that the supporter
and Mounting Bracket will not be struck when the optical axis is adjusted.
With the E3S-5E4 (41), the Spacer is not particularly required. Use the Spacer, however, to directly mount both the E3S-2E4 (41) and -5E4 (41).
In the interest of product improvement, specifications are subject to change without notice.
14