English
Language : 

E3S-2B41 Datasheet, PDF (10/15 Pages) Omron Electronics LLC – Photoelectric Sensor with Built-in Amplifier
◁
Dimensions
General-purpose Sensors
E3S-2E4
E3S
(Unit: mm)
Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet.
E3S-2E41
18.8 a*1
9.9
Lens: 7 dia.
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 80 g each
Indicator
Sensitivity adjuster*2
(50)
40
5
16
9 11.4
6 dia.
2.7
1.2
9
16.2
25.1
E3S-5E4
15.4
12.8 dia.
16.7
16 4
9 16.7
3.2
Two, M3
3.2
4
5.5
20
E39-L3
30
*1 The mounting bracket can also be used on side a.
*2 Receiver only.
a*1
18.8
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 80 g each
Indicator
8.3
Lens: 7 dia.
(50)
40
32.3
9 11.4
Sensitivity adjuster*2
5
6 dia.
1.2
9
25.1
15.4
12.8 dia.
16.7
16 4
9 16.7
3.2
Two, M3
3.2
4
5.5
20
30
*1 The mounting bracket can also be used on side a.
*2 Receiver only.
E3S-5E41
23
a*1
20
Lens: 11 dia.
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 155 g each
Indicator
(67)
55
11
Sensitivity adjuster*2
13 7
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 165 g each
23
a*1
20
Lens: 11 dia.
Indicator
(75)
63
11
Sensitivity adjuster*2
13 7
20.4
1.6
12
22
(32)
20
13 dia.
22.2
20 5
4.2
2.1R
4.2 5
2.1R
Two, M4
6.5 25.4
39
slotted hexagonal bolts
1.9 E39-L6
*1 The mounting bracket can also be used on side a.
*2 Receiver only.
20.4
1.6
12
(32)
20
13 dia.
22.2
20 5
4.2
2.1R
4.2 5
2.1R
18.6
Two, M4
25.4
slotted hexagonal bolts
6.5
39
1.9
*1 The mounting bracket can also be used on side a.
*2 Receiver only.
Note: Models numbers for Through-beam Sensors (E3S-@E4, E3S-@E41) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "L" to the set model number (example: E3S-2LE4), the model number of the Receiver, by adding "D"
(example: E3S-2DE4.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
10
 ▷