E3F2 Datasheet, PDF (13/14 Pages) Omron Electronics LLC – M18 Cylindrical Photoelectric

E3F2
Y92E-B18 Mounting Bracket
E3F2
32±0.2
(1.26±0.008)
47 (1.85) max.
30
(1.18)
18 (0.71)
dia.
17 (0.67) max.
7 (0.28)
Note: Hexagonal nut: M5 x 32
Material: plastic
E39-F31 Lens Cap
Glass plate
4 (0.16) max.
Metal rim Gasket
E3F2
20 (0.79) dia.
J OPTIONAL CONNECTOR CABLES
Straight Connector Cable
Y96E-44SDj
14.67
(0.58)
34.92
(1.37)
Right Angle Connector Cable
Y96E-44RDj
14.67
(0.58)
26.65
(1.05)
Silver-plated
copper contacts
Aluminum
coupling nut
Silver-plated
copper contacts
Aluminum
coupling nut
22 AWG, PVC jacketed cable rated for 300 V, 90°C:
2 m (6.56 ft) length for Y96E-44SD2
5 m (16.40 ft) length for Y96E-44SD5
10 m (32.81 ft) length for Y96E-44SD10
22 AWG, PVC jacketed cable rated for 300 V, 90°C:
2 m (6.56 ft) length for Y96E-44RD2
5 m (16.40 ft) length for Y96E-44RD5
10 m (32.81 ft) length for Y96E-44RD10
Note: Cable may be extended to a maximum of 200 m (656 ft.)
Terminals/Connections
Pin configuration NPN
10–30 VDC
4
13
2
max. 100 mA
0
to 1 Light-ON
to 3 Dark-ON
Viewed from
pinside of
connector
Pin configuration PNP
10–30 VDC
max. 100 mA
4
13
2
0 Viewed from
to 1 Light-ON ^{pinside of}
connector
to 3 Dark-ON
Assembly Directions
Insert the M12 threaded end of the
sensor into socket of connector so
that the notch correctly aligns the
pins. Tighten the coupling nut by
hand, not using a tool, until all the
threads on the rear of the sensor
are covered. This assures a posi-
tive connection, important for instal-
lations with vibration.
Connector
Cable
Brown Pin 1 )VDC
Black Pin 4 Output
Blue Pin 3 0V
Pink (White) Pin 2
Mode Selection
Note: Water tightness with connector is only valid when authorized connections are
used. Cordset wire colors are shown in parentheses.
13