E3F2 Datasheet, PDF (12/14 Pages) Omron Electronics LLC – M18 Cylindrical Photoelectric

E3F2
E3F2
E39-RSA Reflector
10 (0.39) 8
35 (1.38)
33 (1.30)
0.7 (0.03)
Four, R1
Adhesive
Reflecting ^tape
surface
E39-RU1 Right Angle Adapter
4.0 (0.16)
E39-RSB Reflector
40 (1.57)
38 (1.50)
0.7 (0.03)
33
(1.30)
35
(1.38)
Four, R1
Adhesive
tape
Reflecting
surface
10.6 (0.42)
30 TYP.
6x2 mm
16.0 (0.63)
15.7 (0.62)
18.5 (0.73)
3.3 (0.13)
3.0 (0.12)
8.9 (0.35)
23.9 (0.94)
20.5 (0.81)
6.1
(0.24)
9.2
(0.36)
5-40 SUS set screw
45°x0.5 all around
M18x1 internal threads
45°
28.7 (1.13)
14.1
(0.56)
22.0 (0.87)
24.6 (0.97)
Mounting E39-RU1
Do not exceed a torque value of 20 kg S cm (2.0 N S m, 17.4 in S lbs) when tightening the adapter onto the sensor.
Use a 1/16” (1.5 mm) hex key on the set screw to secure the adapter to the E3F2. Do not exceed a torque of 3.5 kg S cm (0.35 N S m, 3.0
in S lbs). When set properly, the set screw will still extend beyond the adapter wall. Make sure to loosen the set screw before removing the
adapter from the sensor.
12