E5CK Datasheet, PDF (12/22 Pages) Omron Electronics LLC – Advanced, Compact Digital Controllers

I Parameters Operation
Level 0 Mode
1300
0
PV/SV
The process value is displayed on the No.1 display and the set point is displayed on the No.2 display.
When the multi-SP function is in use, the value of whichever is set, set point 0 or 1, is linked.
sp-m
0
Set Point During SP Ramp
Monitors the set point when the SP ramp function is used.
o
MV Monitor (Heat)
50.0
c-o
50.0
r-5
run
secr
1
keyp
off
MV Monitor (Cool)
Used when the Unit is in heating and cooling control operation.
Run/Stop
Security
Any mode marked with "X" in the following table is not displayed on the menu when this parameter is set to
"0" to "3."
Mode
Set value
0 123 4
Calibration
Option
xxx x
xx x
Expansion
Setup
xx x
xx x
Level 2
xx
Level 1, 0
x
The Unit will be in only level 0 mode and the menu will not be available when this parameter is set to "4" to
"6."
Only the "PV/SP monitor" and "set point" parameter can be used when this parameter is set to "5."
Only the "PV/SP monitor" parameter can be used when this parameter is set to "6."
A/M Key Protect
Invalidate the function of the A/M Key.
3 8. 8
16.0
MV Manual
Process value
Manipulated variable
MANU indicator
I-74
Digital Controller E5CK