V-15-1A5 Datasheet, PDF (11/16 Pages) Omron Electronics LLC – Miniature Basic Switch

V
V
Dimensions and Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The following illustrations and drawings are for quick-connect terminals (#250) (terminals C). V models with a switching current of
16 A or 11 A incorporates terminals A and C2. These models are different from #250 models in terminal size only. Terminals A, C2,
and side common terminals are omitted from the following drawings. Refer to Kinds of Terminals on page 119 for these terminals.
4. The j in the model number is for the terminal code.
5. The operating characteristics are for operation in the A direction ( ).
Pin Plunger Models
(Without Barrier)
V-21-1j6
PT
2.8
V-16-1j5
V-11-1j4
2.8
OP
10.3±0.1
A ^20.2±0.25
1.6
3.1
+0.13
–0.03
dia.
holes
0.6
2.8
8.4
15.9 ^19.1
4.2
2.8
3.1
+0.13
–0.03
3.4±0.15 dia.
t=0.8
Three, quick-connect
10.3
22.2±0.1 _2.8 (12.0) _{terminals (#250)}
27.8
39.8±0.8
(With Right-hand Barrier)
V-21-1jR6
V-16-1jR5
PT
2.8
2.8
OP
10.3±0.1
A ^20.2±0.25
1.6
3.1
+0.13
–0.03
3.1
+0.13
–0.03
dia.
holes
2.8
0.6
8.4
19.1
15.9
21.9
4.2
2.8
3.4±0.15 dia.
0.6
t=0.8
22.2±0.1 _2.8
(12.0)
Three, quick-connect
terminals (#250)
10.3
27.8
39.8±0.8
40.2
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
V-21-1j6
3.92 N {400 gf}
0.78 N {80 gf}
1.2 mm
1.0 mm
0.4 mm
14.7±0.4 mm
V-16-1j5
1.96 N {200 gf}
0.49 N {50 gf}
(With Left-hand Barrier)
V-21-1jL6
V-16-1jL5
4.2
2.8
0.6
10.3
3.1
+0.13
–0.03
dia.
holes
20.2±0.25
A
1.6
0.6
2.8
2.8 ^{2.8 PT}
19.1 8.4
21.9
15.9
t=0.8
Three, quick-connect
terminals (#250)
(12.0) _2.8 22.2±0.1
27.8
39.8±0.8
10.3±0.1 ^OP
3.1
+0.13
–0.03
3.4±0.15 dia.
40.2
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
V-11-1j4
0.98 N {100 gf}
0.20 N {20 gf}
1.2 mm
1.0 mm
0.4 mm
14.7±0.4 mm
V-11-1j5
1.96 N {200 gf}
0.49 N {50 gf}
120