G2RS Datasheet, PDF (10/12 Pages) List of Unclassifed Manufacturers – General-purpose Relay

Mounting Height of Relay with Back-connecting Sockets
G2R-@P
G2R-@A
G2R-@7P
44.5
(1.75)
G2R Relay
P2R-_P
Socket
38.0
(1.50)
G2R Relay
P2R-_A
Socket
47.5
(1.87)
Mounting Tracks
PFP-100N, PFP-50N
PFP-100N2
4.5
(0.18)
15 (0.59)
25
10
25 (0.98)
25
25
10 (0.39)
1,000 (39.37)
or 500 (19.68)
7.3±0.15
(0.29±0.006)
35±0.3 27±0.15
15(0.59)
1
or 5 (0.20)
It is recommended to use a panel 1.6 to 2.0 mm thick.
4.5 (0.18)
15 (0.59)
25
10
16 (0.63)
25 (0.98)
1,000
(39.37)
25
25 15
10 (0.39)
35±0.3
(1.38±0.01)
27
(1.06)
24
(0.94)
1 (0.04)
29.2
(1.15)
1.5 (0.06)
End Plate
PFP-M
50
(1.97)
10 (0.39)
6.2 (0.24)
1.8 (0.07)
1 (0.04)
35.5 35.3
1.8 (1.40) _(1.39)
(0.07)
11.5
(0.45) _{10 (0.39)}
M4 x 8 pan
head screw
1.3 (0.05)
4.8 (0.19)
Spacer
PFP-S
5 (0.20)
16 (0.63)
12 (0.47)
44.3
(1.74)
34.8
(1.37)
16.5 (0.65)
Precautions
!CAUTION
Do not use the test button for any purpose other than testing. Be
sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely.
!CAUTION
Check that the test button is released before turning ON relay cir-
cuits.
!CAUTION
If the test button is pulled out too forcefully, it may bypass the mo-
mentary testing position and go straight into the locked position.
!CAUTION
Use an insulated tool when you operate the test button.
Precautions for P2RF-@-S Connection
• Do not move the screwdriver up, down, or from side to side while it
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
• Do not insert the screwdriver at an angle. Doing so may break the
side of the socket and result in a short-circuit.
254
General-purpose Relay G2RS-(S)