MSC7110-01 Datasheet, PDF (1/18 Pages) OKI electronic componets – 12-Segment x 16-Digit or 16-Segment x12-Digit Display Controller/Driver

FEDL7110-03
FEDL7110-03
¡ Semiconductor ^{¡ Semiconductor}
Th_Mis _Sv_Cer₇s₁io₁n₀:_-0S₁e_/p₇.₁2₁0₂0_-0₀₁
Previous version: Nov. 1997
MSC7110-01/7112-01
12-Segment ¥ 16-Digit or 16-Segment ¥ 12-Digit Display Controller/Driver
GENERAL DESCRIPTION
The MSC7110-01/MSC7112-01 is a display controller to display the timer of video tape recorder,
channel operation, and other infomaiton by a vaccum fluorescent display tube.
Display data is input by serial transfer from microcontroller.
FEATURES
• Provides the interface with a microcontroller by three signal lines. : DATA IN, CLOCK, and LOAD
• Driver output can directly be connected to a vaccum fluorescent display tube without a
pull-down resistor.
• Display is turned on by dynamic drive mode.
• The number of display digits are programmable in the range of : 1 to 12 digits (MSC7112-01)
1 to 16 digits (MSC7110-01)
• 12-segment driver output
: 16 driver outputs (MSC7112-01)
12 driver outputs (MSC7110-01)
• The LED drivers can turn on 5 outputs statically.
• RAM data can directly be displayed.
• The brightness adjustment is programmable and brightness can be adjusted every 1/15
step.
• Built-in power-on-reset circuit
• The vacuum fluorescent display tube driver outputs high withstand voltage : V_DD-V_EE=45V (max).
• Logic supply voltage
: V_DD=5V ±10%
• Package options:
42-pin plastic SDIP (SDIP42-P-600-1.778) : (Product name : MSC7112-01SS)
44-pin plastic QFP (QFP44-P-910-0.80-2K) : (Product name : MSC7110-01GS-2K/MSC7112-01GS-2K)
1/18