|
ML60852A Datasheet, PDF (1/81 Pages) OKI electronic componets – USB Device Controller | |||
|
FEDL60852A-03
1Semiconductor
ML60852A
USB Device Controller
This version: Nov. 2001
Previous version: Oct. 2001
GENERAL DESCRIPTION
The ML60852A is a general purpose Universal Serial Bus (USB) device controller.
The ML60852A provides a USB serial interface engine, USB transceiver, FIFOs, control/status registers,
application interface circuit, and oscillation circuit thereby easily realizing a USB system. The ML60852A
supports four types of data transfer such as control transfer, bulk transfer, interrupt transfer and isochronous
transfer, and also supports five or six endpoints.
FEATURES
⢠USB1.1 compliant
⢠Supports full-speed (12 Mbps).
⢠Supports four types of transfer; control transfer, bulk transfer, interrupt transfer, and isochronous transfer.
⢠Endpoints: 5 to 6 endpoints
Control EP
1
Bulk/interrupt EP
3
Isochronous/bulk/interrupt EP 1 or 2
⢠Built-in FIFO for data storage
⢠A two-layer configuration of FIFO for each of EP1, EP2, EP4, and EP5
⢠8/16 bit DMA supported (EP1, EP2, EP4, and EP5)
⢠Intelligent Serial Interface Engine (SIE)
⢠Supports bus-powered device.
The suspend condition is automatically detected and the low-power mode is activated. Normal operation is
automatically restarted when the resume condition is detected.
⢠Built-in USB transceiver circuit
⢠Ta = -20 to +80 °C
⢠VCC=3.0 to 3.6 V
⢠Interface with 5 V circuit is possible. (Input: 5 V tolerant, output: TTL)
⢠Built-in 12 MHz /6 MHz oscillation circuit
⢠Package options:
44-pin plastic TQFP
56-pin plastic LGA
1/81
|
▷ |