NX3L4053 Datasheet, PDF(7/22 Page) NXP Semiconductors – Triple low-ohmic single-pole double-throw analog switch

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

NX3L4053 Datasheet, PDF (7/22 Pages) NXP Semiconductors – Triple low-ohmic single-pole double-throw analog switch

◁

NXP Semiconductors

NX3L4053

Triple low-ohmic single-pole double-throw analog switch

VIL or VIH

VIL

VCC

nY0 1

nY1 2

switch

GND

VI = 0.3 V or VCC ï 0.3 V; VO = VCC ï 0.3 V or 0.3 V.

Fig 6. Test circuit for measuring ON-state leakage current

switch nS E

VIL VIL

VIH VIL

001aal740

11.2 ON resistance

Table 8. ON resistance[1]

At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for graphs see Figure 8 to Figure 14.

Symbol Parameter

Conditions

Tamb = ï40 ï°C to +85 ï°C Tamb = ï40 ï°C to +125 ï°C Unit

Min Typ[2] Max

Min

Max

RON(peak) ON resistance VI = GND to VCC;

(peak)

ISW = 100 mA; see Figure 7

VCC = 1.4 V

1.8

3.8

VCC = 1.65 V

1.0

1.7

VCC = 2.3 V

0.6

0.9

VCC = 2.7 V

0.6 0.80

VCC = 4.3 V

0.5 0.80

ïRON

ON resistance VI = GND to VCC;

[3]

mismatch

ISW = 100 mA

between

channels

VCC = 1.4 V; VSW = 0.4 V

0.23 0.38

VCC = 1.65 V; VSW = 0.5 V

0.23 0.28

VCC = 2.3 V; VSW = 0.7 V

0.12 0.15

VCC = 2.7 V; VSW = 0.8 V

0.12 0.15

VCC = 4.3 V; VSW = 0.8 V

0.12 0.15

RON(flat) ON resistance VI = GND to VCC;

[4]

(flatness)

ISW = 100 mA

VCC = 1.4 V

1.0

3.3

VCC = 1.65 V

0.5

1.2

VCC = 2.3 V

0.15 0.3

VCC = 2.7 V

0.13 0.3

VCC = 4.3 V

0.2

0.4

4.2

1.8

1.0

0.38 ï

0.18 ï

3.6

1.3

0.35 ï

0.45 ï

[1] For NX3L4053PW (TSSOP16 package), all ON resistance values are up to 0.05 ï higher.

[2] Typical values are measured at Tamb = 25 ï°C.

[3] Measured at identical VCC, temperature and input voltage.

[4] Flatness is defined as the difference between the maximum and minimum value of ON resistance measured at identical VCC and

temperature.

NX3L4053

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 4 â 7 November 2011

7 of 22

▷