NX3L4053 Datasheet, PDF(1/22 Page) NXP Semiconductors – Triple low-ohmic single-pole double-throw analog switch

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

NX3L4053 Datasheet, PDF (1/22 Pages) NXP Semiconductors – Triple low-ohmic single-pole double-throw analog switch

NX3L4053

Triple low-ohmic single-pole double-throw analog switch

Rev. 4 â 7 November 2011

Product data sheet

1. General description

The NX3L4053 is a triple low-ohmic single-pole double-throw analog switch, suitable for

use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input

(nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All

three switches share an enable input (E). A digital enable pin E is common to all

switches.When E is HIGH, the switches are turned off.

Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and

fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels

in 3.3 V applications without significant increase in supply current ICC. This makes it

possible for the NX3L4053 to switch 4.3 V signals with a 1.8 V digital controller,

eliminating the need for logic level translation. The NX3L4053 allows signals with

amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its

low ON resistance (0.5 ï) and flatness (0.13 ï) ensures minimal attenuation and

distortion of transmitted signals.

2. Features and benefits

ï® Wide supply voltage range from 1.4 V to 4.3 V

ï® Very low ON resistance (peak):

ïµ 1.8 ï (typical) at VCC = 1.4 V

ïµ 1.0 ï (typical) at VCC = 1.65 V

ïµ 0.6 ï (typical) at VCC = 2.3 V

ïµ 0.6 ï (typical) at VCC = 2.7 V

ïµ 0.5 ï (typical) at VCC = 4.3 V

ï® Break-before-make switching

ï® High noise immunity

ï® ESD protection:

ïµ HBM JESD22-A114F Class 3A exceeds 4000 V

ïµ MM JESD22-A115-A exceeds 200 V

ïµ CDM AEC-Q100-011 revision B exceeds 1000 V

ïµ IEC61000-4-2 contact discharge exceeds 6000 V for switch ports

ï® CMOS low-power consumption

ï® Latch-up performance exceeds 100 mA per JESD 78 Class II Level A

ï® 1.8 V control logic at VCC = 3.6 V

ï® Control input accepts voltages above supply voltage

ï® Very low supply current, even when input is below VCC

ï® High current handling capability (350 mA continuous current under 3.3 V supply)

ï® Specified from ï40 ï°C to +85 ï°C and from ï40 ï°C to +125 ï°C

▷