74HC590 Datasheet, PDF (7/21 Pages) NXP Semiconductors – 8-bit binary counter with output register; 3-state

NXP Semiconductors
74HC590
8-bit binary counter with output register; 3-state
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min Max
Unit
V_CC
supply voltage
I_IK
input clamping current
V_I < −0.5 V or V_I > V_CC + 0.5 V
I_OK
output clamping current
V_O < −0.5 V or V_O > V_CC + 0.5 V
I_O
output current
V_O = −0.5 V to V_CC + 0.5 V
RCO standard output
−0.5 +7.0
V
[1] _-
±20
mA
[1] _-
±20
mA
-
±25
mA
Qn bus driver output
-
±35
mA
I_CC
I_GND
T_stg
P_tot
supply current
ground current
storage temperature
total power dissipation
T_amb = −40 °C to +125 °C
DIP16 package
-
70
mA
−70 -
mA
−65 +150 °C
[2]
-
750
mW
SO16 package
-
500
mW
TSSOP16 package
-
500
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For DIP16 package: P_tot derates linearly with 12 mW/K above 70 °C.
For SO16 packages: P_tot derates linearly with 8 mW/K above 70 °C.
For TSSOP16 packages: P_tot derates linearly with 5.5 mW/K above 60 °C.
For DHVQFN16 packages: P_tot derates linearly with 8 mW/K above 60 °C.
8. Recommended operating conditions
Table 5.
Symbol
V_CC
V_I
V_O
∆t/∆V
T_amb
Recommended operating conditions
Parameter
Conditions
supply voltage
input voltage
output voltage
input transition rise and fall rate
ambient temperature
V_CC = 2.0 V
V_CC = 4.5 V
V_CC = 6.0 V
Min
Typ
Max
Unit
2.0
5.0
6.0
V
0
-
0
-
-
-
V_CC
V
V_CC
V
625
ns/V
-
1.67
139
ns/V
-
-
83
ns/V
−40
-
+125
°C
74HC590_2
Product data sheet
Rev. 02 — 28 April 2009
© NXP B.V. 2009. All rights reserved.
7 of 21