74F543 Datasheet, PDF (6/15 Pages) NXP Semiconductors – Octal registered transceiver, non-inverting 3-State

NXP Semiconductors
74F543
Octal latched transceiver with dual enable; 3-state
9. Static characteristics
Table 6. Static characteristics
Symbol Parameter
Conditions
V_IK
input clamping voltage V_CC = 4.5 V; I_IK = −18 mA
V_OH
HIGH-level output
voltage
V_CC = 4.5 V; V_IL = 0.8 V; V_IH = 2.0 V
pins A0 to A7; I_OH = −3 mA
V_CC = ±10 %
V_CC = ±5 %
pins B0 to B7; I_OH = −15 mA
V_CC = ±10 %
V_CC = ±5 %
V_OL
LOW-level output
voltage
V_CC = 4.5 V; V_IL = 0.8 V; V_IH = 2.0 V
pins A0 to A7; I_OL = 24 mA
V_CC = ±10 %
V_CC = ±5 %
pins B0 to B7; I_OL = 64 mA
V_CC = ±10 %
V_CC = ±5 %
I_I
input leakage current V_CC = 5.5 V
pins OEAB, OEBA, EAB;
V_I = 7.0 V
other pins; V_I = 5.5 V
I_IH
HIGH-level input current V_CC = 5.5 V; V_I = 2.7 V
I_IL
LOW-level input current V_CC = 5.5 V; V_I = 0.5 V
pins EAB, EBA
other pins
I_OZ
OFF-state output current V_CC = 5.5 V
V_O = 2.7 V; V_I = 2.0 V
V_O = 0.5 V; V_I = 0.8 V
I_O
output current
V_CC = 5.5 V
pins A0 to A7
pins B0 to B7
I_CC
supply current
V_CC = 5.5 V
outputs HIGH-state
outputs LOW-state
outputs OFF-state
25 °C
0 °C to 70 °C Unit
Min Typ^[1] Max Min Max
−1.2 −0.73 - −1.2 - V
-
-
- 2.4 - V
- 3.4 - 2.7 - V
-
-
- 2.0 - V
-
-
- 2.0 - V
- 0.35 -
- 0.35 -
-
-
-
- 0.42 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[2]
- −60 -
- −100 -
-
70
-
-
95
-
-
95
-
- 0.5 V
- 0.5 V
- 0.55 V
- 0.55 V
- 100 µA
-
1 mA
-
20 µA
- −1.2 mA
- −0.6 mA
-
70 µA
- −600 µA
- −150 mA
- −225 mA
- 105 mA
- 135 mA
- 135 mA
[1] All typical values are measured at V_CC = 5 V.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
74F543_4
Product data sheet
Rev. 04 — 26 January 2010
© NXP B.V. 2010. All rights reserved.
6 of 15