PDTA123T Datasheet, PDF (4/10 Pages) NXP Semiconductors – PNP resistor-equipped transistors; R1 = 2.2 kW, R2 = open

NXP Semiconductors
PDTA123T series
PNP resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
5. Limiting values
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
V_CBO
V_CEO
V_EBO
I_O
I_CM
P_tot
collector-base voltage
open emitter
-
collector-emitter voltage open base
-
emitter-base voltage
open collector
-
output current
-
peak collector current
single pulse;
-
t_p ≤ 1 ms
total power dissipation
T_amb ≤ 25 °C
SOT416
[1] _-
SOT346
[1] _-
SOT883
[2][3] _-
SOT54
[1] _-
SOT23
[1] _-
SOT323
[1] _-
T_stg
storage temperature
−65
T_j
junction temperature
-
T_amb
ambient temperature
−65
Max
−50
−50
−5
−100
−100
150
250
250
500
250
200
+150
150
+150
Unit
V
V
V
mA
mA
mW
mW
mW
mW
mW
mW
°C
°C
°C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
6. Thermal characteristics
Table 7.
Symbol
R_th(j-a)
Thermal characteristics
Parameter
thermal resistance from
junction to ambient
SOT416
SOT346
SOT883
SOT54
SOT23
SOT323
Conditions
in free air
Min Typ Max Unit
[1] _-
-
833 K/W
[1] _-
-
500 K/W
[2][3] _-
-
500 K/W
[1] _-
-
250 K/W
[1] _-
-
500 K/W
[1] _-
-
625 K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
PDTA123T_SER_2
Product data sheet
Rev. 02 — 3 September 2009
© NXP B.V. 2009. All rights reserved.
4 of 10