74HC2G66GT Datasheet, PDF (4/23 Pages) NXP Semiconductors – Dual single-pole single-throw analog switch

NXP Semiconductors
74HC2G66; 74HCT2G66
Dual single-pole single-throw analog switch
7. Functional description
Table 4. Function table^[1]
Input nE
L
H
[1] H = HIGH voltage level; L = LOW voltage level.
8. Limiting values
Switch
OFF
ON
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max
Unit
V_CC
I_IK
I_SK
I_SW
I_CC
I_GND
T_stg
P_tot
supply voltage
input clamping current
switch clamping current
switch current
supply current
ground current
storage temperature
total power dissipation
V_I < 0.5 V or V_I > V_CC + 0.5 V
V_I < 0.5 V or V_I > V_CC + 0.5 V
V_SW > 0.5 V or V_SW < V_CC + 0.5 V
T_amb = 40 C to +125 C
per package
0.5
[1] _-
[1] _-
-
-
30
65
[2] _-
+11.0 V
20
mA
20
mA
20
mA
30
mA
-
mA
+150
C
300
mW
per switch
[2] _-
100
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For TSSOP8 packages: above 55 C the value of P_tot derates linearly with 2.5 mW/K.
For VSSOP8 packages: above 110 C the value of P_tot derates linearly with 8.0 mW/K.
For XSON8 packages: above 118 C the value of P_tot derates linearly with 7.8 mW/K.
74HC_HCT2G66
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 3 October 2013
© NXP B.V. 2013. All rights reserved.
4 of 23