BTA204S Datasheet, PDF (2/13 Pages) NXP Semiconductors – Three-quadrant triacs high commutation

Philips Semiconductors
BTA204S series B and C
Three-quadrant triacs high communication
3. Ordering information
Table 2: Ordering information
Type number Package
Name Description
BTA204S-600B DPAK
plastic single-ended surface mounted package; 3 leads (one lead cropped)
BTA204S-600C
BTA204S-800B
BTA204S-800C
4. Limiting values
Version
SOT428
Table 3: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
V_DRM
repetitive peak off-state voltage
BTA204S-600B; BTA204S-600C
BTA204S-800B; BTA204S-800C
I_T(RMS)
RMS on-state current
full sine wave; T_mb ≤ 107 °C;
see Figure 4 and 5
I_TSM
non-repetitive peak on-state current full sine wave; T_j = 25 °C prior to surge;
see Figure 2 and 3
t = 20 ms
t = 16.7 ms
I²t
I²t for fusing
t = 10 ms
dI_T/dt
repetitive rate of rise of on-state
current after triggering
I_TM = 6 A; I_G = 0.2 A; dI_G/dt = 0.2 A/µs
I_GM
V_GM
P_GM
P_G(AV)
T_stg
T_j
peak gate current
peak gate voltage
peak gate power
average gate power
storage temperature
junction temperature
over any 20 ms period
Min
[1] _-
-
-
-
-
-
-
-
-
-
-
−40
-
Max
600
800
4
25
27
3.1
100
2
5
5
0.5
+150
125
Unit
V
V
A
A
A
A²s
A/µs
A
V
W
W
°C
°C
[1] Although not recommended, off-state voltages up to 800 V may be applied without damage, but the triac may switch to the on-state.
The rate of rise of current should not exceed 6 A/µs.
9397 750 14862
Product data sheet
Rev. 03 — 24 May 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
2 of 13