74HC4067 Datasheet, PDF (16/29 Pages) NXP Semiconductors – 16-channel analog multiplexer/demultiplexer

NXP Semiconductors
74HC4067; 74HCT4067
16-channel analog multiplexer/demultiplexer
Table 10. Dynamic characteristics 74HCT4067
GND = 0 V; t_r = t_f = 6 ns; C_L = 50 pF unless specified otherwise; for test circuit see Figure 14.
V_is is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
V_os is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
25 °C
Typ
Max
t_pd
propagation delay Yn to Z; see Figure 12
V_CC = 4.5 V
Z to Yn
[1][2]
9
15
t_off
turn-off time
V_CC = 4.5 V
E to Yn; see Figure 13
V_CC = 4.5 V
V_CC = 5.0 V; C_L = 15 pF
Sn to Yn
6
12
[3]
26
55
26
-
V_CC = 4.5 V
V_CC = 5.0 V; C_L = 15 pF
E to Z
31
55
30
-
V_CC = 4.5 V
Sn to Z
30
60
t_on
turn-on time
V_CC = 4.5 V
E to Yn; see Figure 13
V_CC = 4.5 V
V_CC = 5.0 V; C_L = 15 pF
Sn to Yn
35
60
[4]
32
60
32
-
V_CC = 4.5 V
V_CC = 5.0 V; C_L = 15 pF
E to Z
35
60
33
-
V_CC = 4.5 V
Sn to Z
38
65
V_CC = 4.5 V
38
65
C_PD
power dissipation per switch; V_I = GND to (V_CC − 1.5 V) ^[5]
-
29
capacitance
−40 °C to +125 °C Unit
Max Max
(85 °C) (125 °C)
19
22 ns
15
18 ns
69
83 ns
-
- ns
69
83 ns
-
- ns
75
90 ns
75
90 ns
75
90 ns
-
- ns
75
90 ns
-
- ns
81
98 ns
81
98 ns
-
- pF
[1] t_pd is the same as t_PHL and t_PLH.
[2] Due to higher Z terminal capacitance (16 switches versus 1) the delay figures to the Z terminal are higher than those to the Y terminal.
[3] t_on is the same as t_PHZ and t_PLZ.
[4] t_off is the same as t_{PZH and} t_PZL.
[5] C_PD is used to determine the dynamic power dissipation (P_D in µW).
P_D = C_PD × V_CC2 × f_i + ∑{(C_L + C_sw) × V_CC2 × f_o} where:
f_i = input frequency in MHz;
f_o = output frequency in MHz;
∑{(C_L + C_sw) × V_CC2 × f_o} = sum of outputs;
C_L = output load capacitance in pF;
C_sw = switch capacitance in pF;
V_CC = supply voltage in V.
74HC_HCT4067_3
Product data sheet
Rev. 03 — 15 October 2007
© NXP B.V. 2007. All rights reserved.
16 of 29