English
Language : 

74HC4067 Datasheet, PDF (13/29 Pages) NXP Semiconductors – 16-channel analog multiplexer/demultiplexer
◁
NXP Semiconductors
74HC4067; 74HCT4067
16-channel analog multiplexer/demultiplexer
Table 8. Static characteristics 74HCT4067 …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
Min Typ Max Unit
IS(ON)
ON-state leakage current VCC = 5.5 V; VI = VIH or VIL;
|VSW| = VCC − GND; see Figure 11
-
-
±8.0 µA
ICC
supply current
VI = VCC or GND; Vis = GND or VCC;
-
-
80.0 µA
Vos = VCC or GND; VCC = 4.5 V to 5.5 V
∆ICC
additional supply current
per input pin; VI = VCC − 2.1 V; other
inputs at VCC or GND; VCC = 4.5 V to 5.5 V
pin E
-
-
270 µA
pin Sn
-
-
225 µA
Tamb = −40 °C to +125 °C
VIH
HIGH-level input voltage VCC = 4.5 V to 5.5 V
2.0 -
-
V
VIL
LOW-level input voltage VCC = 4.5 V to 5.5 V
-
-
0.8 V
II
input leakage current
VI = VCC or GND; VCC = 5.5 V
-
-
±1.0 µA
IS(OFF)
OFF-state leakage current VCC = 5.5 V; VI = VIH or VIL;
|VSW| = VCC − GND; see Figure 10
per channel
-
-
±1.0 µA
all channels
-
-
±8.0 µA
IS(ON)
ON-state leakage current VCC = 5.5 V; VI = VIH or VIL;
|VSW| = VCC − GND; see Figure 11
-
-
±8.0 µA
ICC
supply current
VI = VCC or GND; Vis = GND or VCC;
-
-
160 µA
Vos = VCC or GND; VCC = 4.5 V to 5.5 V
∆ICC
additional supply current
per input pin; VI = VCC − 2.1 V; other
inputs at VCC or GND; VCC = 4.5 V to 5.5 V
pin E
-
-
294 µA
pin Sn
-
-
245 µA
VCC
VIH
E
Yn
ISW
Vis
Z
ISW
GND
Vos
001aag734
Vis = VCC and Vos = GND
Vis = GND and Vos = VCC
Fig 10. Test circuit for measuring OFF-state leakage
current
VCC
VIL
E
Z
ISW
Yn Vos
Vis
GND
001aag735
Vis = VCC and Vos = open
Vis = GND and Vos = open
Fig 11. Test circuit for measuring ON-state leakage
current
74HC_HCT4067_3
Product data sheet
Rev. 03 — 15 October 2007
© NXP B.V. 2007. All rights reserved.
13 of 29
 ▷