ADC1004S030 Datasheet, PDF (15/19 Pages) NXP Semiconductors – Single 10 bits ADC, up to 30 MHz, 40 MHz or 50 MHz

NXP Semiconductors
12. Application information
ADC1004S030/040/050
Single 10 bits ADC, up to 30 MHz, 40 MHz or 50 MHz
CLK
1
TC
2
V_CCA
3
(3) 100 nF _AGND
4
28 ^VCCD1
DGND1 ⁽³⁾
27
IR
26
D9
25
100 nF
100 nF
AGND
AGND
n.c.
5
D8
24
RB⁽¹⁾
6
D7
23
RM⁽¹⁾
D6
7
22
VI ^ADC1004S050 D5
8
21
RT⁽¹⁾
9
20 ^D4
100 nF
AGND ₍₃₎
OE
10
V_CCD2
11
100 nF _DGND2
12
D3
19
D2
18
D1
17
V_CCO
13
(3) 100 nF _OGND
14
D0
16
n.c.⁽²⁾
15
100 nF
014aaa338
The analog and digital supplies should be separated and well decoupled
A user manual is available that describes the demonstration board that uses the version ADC1004S030/040/050 family with an
application environment.
(1) RB, RM and RT are decoupled to AGND.
(2) Pin 15 may be connected to DGND in order to prevent noise influence.
(3) Decoupling capacitor for supplies; must be placed close to the device.
Fig 14. Application diagram
12.1 Alternative parts
The following alternative parts are also available:
Table 9. Alternative parts
Type number
Description
ADC1003S030
Single 10 bits ADC, with
voltage regulator^[1]
ADC1003S040
Single 10 bits ADC, with
voltage regulator^[1]
ADC1003S050
Single 10 bits ADC, with
voltage regulator^[1]
ADC1005S060
Single 10 bits ADC^[1]
ADC0804S030
Single 8 bits ADC^[1]
ADC0804S040
Single 8 bits ADC^[1]
ADC0804S050
Single 8 bits ADC^[1]
[1] Pin to pin compatible
Sampling frequency
30 MHz
40 MHz
50 MHz
60 MHz
30 MHz
40 MHz
50 MHz
ADC1004S030_040_050_3
Product data sheet
Rev. 03 — 7 August 2008
© NXP B.V. 2008. All rights reserved.
15 of 19