LPC54102J512BD64QL Datasheet, PDF (14/90 Pages) NXP Semiconductors – 32-bit ARM Cortex-M4/M0+ MCU; 104 kB SRAM; 512 kB flash, 3 x I2C, 2 x SPI, 4 x USART, 32-bit counter/ timers, SCTimer/PWM, 12-bit 5.0 Msamples/sec ADC

NXP Semiconductors
Table 4. Pin description …continued
Symbol
Description
LPC5410x
32-bit ARM Cortex-M4/M0+ microcontroller
PIO0_30/
ADC0_1
PIO0_31/
ADC0_2
PIO1_0/
ADC0_3
PIO1_1/
ADC0_4
PIO1_2/
ADC0_5
C1 12 ^[4] PU I/O; PIO0_30/ADC0_1 — General-purpose digital input/output pin (default). ADC input
AI channel 1 if the DIGIMODE bit is set to 0 in the IOCON register for this pin.
- R — Reserved.
O SCT0_OUT3 — SCT0 output 3.
O CT32B0_MAT2 — 32-bit CT32B0 match output 2.
I R — Reserved.
I CT32B0_CAP2 — 32-bit CT32B0 capture input 2.
C2 13 ^[4] PU I/O; PIO0_31/ADC0_2 — General-purpose digital input/output pin (default). ADC input
AI channel 2 if the DIGIMODE bit is set to 0 in the IOCON register for this pin.
Remark: This pin is also used to force In-System Programming mode (ISP) after
device reset. See the LPC5410x User Manual (Boot Process chapter) for details.
- R — Reserved.
I U2_CTS — Clear To Send input for USART2.
I CT32B2_CAP2 — 32-bit CT32B2 capture input 2.
I R — Reserved.
I CT32B0_CAP3 — 32-bit CT32B0 capture input 3.
O CT32B0_MAT3 — 32-bit CT32B0 match output 3.
C3 14 ^[4] PU I/O; PIO1_0/ADC0_3 — General-purpose digital input/output pin (default). ADC input
AI channel 3 if the DIGIMODE bit is set to 0 in the IOCON register for this pin.
- R — Reserved.
O U2_RTS — Request To Send output for USART2.
O CT32B3_MAT1 — 32-bit CT32B3 match output 1.
I R — Reserved.
I CT32B0_CAP0 — 32-bit CT32B0 capture input 0.
B1 15 ^[4] PU I/O; PIO1_1/ADC0_4 — General-purpose digital input/output pin (default). ADC input
AI channel 4 if the DIGIMODE bit is set to 0 in the IOCON register for this pin.
- R — Reserved.
I/O SWO — Serial wire trace output.
O SCT0_OUT4 — SCT0 output 4.
A1 16 ^[4] PU I/O; PIO1_2/ADC0_5 — General-purpose digital input/output pin (default). ADC input
AI channel 5 if the DIGIMODE bit is set to 0 in the IOCON register for this pin.
- R — Reserved.
I/O SPI1_SSEL3 — Slave Select 3 for SPI1.
O SCT0_OUT5 — SCT0 output 5.
LPC5410x
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.6 — 3 October 2016
© NXP B.V. 2016. All rights reserved.
14 of 90