SC16C850V Datasheet, PDF(1/47 Page) NXP Semiconductors – 1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SC16C850V Datasheet, PDF (1/47 Pages) NXP Semiconductors – 1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface

SC16C850V

1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs,

infrared (IrDA), and XScale VLIO bus interface

Rev. 04 â 14 January 2008

Product data sheet

1. General description

The SC16C850V is a 1.8 V, low power single channel Universal Asynchronous Receiver

and Transmitter (UART) used for serial data communications. Its principal function is to

convert parallel data into serial data and vice versa. The UART can handle serial data

rates up to 5 Mbit/s. SC16C850V can be programmed to operate in extended mode where

additional advanced UART features are available (see Section 6.2).The SC16C850V

family UART provides enhanced UART functions with 128-byte FIFOs, modem control

interface and IrDA encoder/decoder. On-board status registers provide the user with error

indications and operational status. System interrupts and modem control features may be

tailored by software to meet speciï¬c user requirements. An internal loopback capability

allows on-board diagnostics. Independent programmable baud rate generators are

provided to select transmit and receive baud rates.

The SC16C850V with Intel XScale processor VLIO interface operates at 1.8 V and is

available in the HVQFN32 package.

2. Features

I Single channel high performance UART

I 1.8 V operation

I Advanced package: HVQFN32

I Up to 5 Mbit/s data rate at 1.8 V

I 128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU

I 128-byte receive FIFO with error ï¬ags to reduce the bandwidth requirement of the

external CPU

I 128 programmable Receive and Transmit FIFO interrupt trigger levels

I 128 Receive and Transmit FIFO reporting levels (level counters)

I Automatic software (Xon/Xoff) and hardware (RTS/CTS or DTR/DSR) ï¬ow control

I Programmable Xon/Xoff characters

I 128 programmable hardware and software trigger levels

I Automatic 9-bit mode (RS-485) address detection

I Automatic RS-485 driver turn-around with programmable delay

I UART software reset

I High resolution clock prescaler, from 0 to 15 with granularity of 1â16 to allow

non-standard UART clock to be used

I Industrial temperature range (â40 Â°C to +85 Â°C)

I Software compatible with industry standard SC16C650B

I Software selectable baud rate generator

▷