MC33HB2001FK Datasheet, PDF (1/48 Pages) NXP Semiconductors – 10 A H-Bridge, SPI programmable brushed DC motor driver

MC33HB2001
10 A H-Bridge, SPI programmable brushed DC motor driver
Rev. 6.0 — 3 May 2016
Data sheet: Advance information
1 General description
The 33HB2001 is a SMARTMOS monolithic H-Bridge Power IC, enhanced with SPI
configurability and diagnostic capabilities. It is designed primarily for DC motor or servo
motor control applications within the specified current and voltage limits.
The 33HB2001 is able to control inductive loads with peak currents greater than 10 A.
The nominal continuous average load current is 3.0 A. A current mirror output provides
an analog feedback signal proportional to the load current.
This part is designed to specifically address the ISO 26262 safety requirements.
2 Simplified application diagram
Figure 1. Simplified application diagram
3 Features and benefits
• Advanced diagnostic reporting via a serial peripheral interface (SPI): charge pump
undervoltage, overvoltage, and undervoltage on VPWR, short to ground and short
to VPWR for each output, open load, temperature warning and overtemperature
shutdown
• Thermal management: Excellent thermal resistance of <1.0 °C/W between junction and
case (exposed pad)
• Eight selectable slew rates via the SPI: 0.25 V/μs to more than 16 V/μs for EMI and
thermal performance optimization