|
AD8099_13 Datasheet, PDF (1/29 Pages) Analog Devices – Ultralow Distortion, High Speed 0.95 nV/Hz Voltage Noise Op Amp | |||
|
Data Sheet
Ultralow Distortion, High Speed
0.95 nV/ïHz Voltage Noise Op Amp
AD8099
FEATURES
Ultralow noise: 0.95 nV/âHz, 2.6 pA/âHz
Ultralow distortion
2nd harmonic RL = 1 kΩ , G = +2
â92 dB @ 10 MHz
3rd harmonic RL = 1 kΩ , G = +2
â105 dB @ 10 MHz
High speed
GBWP: 3.8 GHz
â3 dB bandwidth:
700 MHz (G = +2)
550 MHz (G = +10)
Slew rate:
475 V/μs (G = +2)
1350 V/μs (G = +10)
New pinout
Custom external compensation, gain range â1, +2 to +10
Supply current: 15 mA
Offset voltage: 0.5 mV max
Wide supply voltage range: 5 V to 12 V
GENERAL DESCRIPTION
The AD8099 is an ultralow noise (0.95 nV/âHz) and distortion
(â92 dBc @10 MHz) voltage feedback op amp, the combination
of which make it ideal for 16- and 18-bit systems. The AD8099
features a new, highly linear, low noise input stage that increases
the full power bandwidth (FPBW) at low gains with high slew
rates. ADIâs proprietary next generation XFCB process enables
such high performance amplifiers with relatively low power.
The AD8099 features external compensation, which lets the
user set the gain bandwidth product. External compensation
allows gains from +2 to +10 with minimal trade-off in band-
width. The AD8099 also features an extremely high slew rate of
1350 V/μs, giving the designer flexibility to use the entire
dynamic range without trading off bandwidth or distortion.
The AD8099 settles to 0.1% in 18 ns and recovers from
overdrive in 50 ns.
The AD8099 drives 100 Ω loads at breakthrough performance
levels with only 15 mA of supply current. With the wide supply
voltage range (5 V to 12 V), low offset voltage (0.1 mV typ),
wide bandwidth (700 MHz for G = +2), and a GBWP up to
3.8 GHz, the AD8099 is designed to work in a wide variety of
applications.
APPLICATIONS
Pre-amplifiers
Receivers
Instrumentation
Filters
IF and baseband amplifiers
A-to-D drivers
DAC buffers
Optical electronics
CONNECTION DIAGRAMS
DISABLE 1
8 +VS
FEEDBACK 1
8 DISABLE
FEEDBACK 2
7 VOUT
âIN 2
7 +VS
âIN 3
6 CC
+IN 3
6 VOUT
+IN 4
5 âVS
NOTES
1. SOLDER THE EXPOSED PADDLE TO
THE GROUND PLANE.
âVS 4
5 CC
NOTES
1. SOLDER THE EXPOSED PADDLE TO
THE GROUND PLANE.
Figure 1. 8-Lead LFCSP (CP-8-2)
Figure 2. 8-Lead SOIC-EP (RD-8-1)
The AD8099 is available in a 3 mm à 3 mm lead frame chip
scale package (LFCSP) with a new pinout that is specifically
optimized for high performance, high speed amplifiers. The
new LFCSP package and pinout enable the breakthrough
performance that previously was not achievable with amplifiers.
The AD8099 is rated to work over the extended industrial
temperature range, â40°C to +125°C.
â40
G = +2
â50
VOUT = 2V p-p
VS = ±5V
RL = 1kï
â60
â70
â80
â90
â100
â110
â120
â130
0.1
SOLID LINE â SECOND HARMONIC
DOTTED LINE â THIRD HARMONIC
1.0
10.0
FREQUENCY (MHz)
Figure 3. Harmonic Distortion vs. Frequency and Gain (SOIC)
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2003â2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
|
▷ |