74HC240-Q100 Datasheet, PDF (1/16 Pages) NXP Semiconductors – Octal buffer/line driver; 3-state; inverting

74HC240-Q100; 74HCT240-Q100
Octal buffer/line driver; 3-state; inverting
Rev. 1 — 30 July 2012
Product data sheet
1. General description
The 74HC240-Q100; 74HCT240-Q100 is a high-speed Si-gate CMOS device and is pin
compatible with Low-Power Schottky TTL (LSTTL).
The 74HC240-Q100; 74HCT240-Q100 is a dual octal inverting buffer/line driver with
3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and
2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
 Automotive product qualification in accordance with AEC-Q100 (Grade 1)
 Specified from 40 C to +85 C and from 40 C to +125 C
 Inverting 3-state outputs
 Multiple package options
 Complies with JEDEC standard no. 7 A
 ESD protection:
 MIL-STD-883, method 3015 exceeds 2000 V
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
74HC240D-Q100
74HCT240D-Q100
40 C to +125 C
SO20
plastic small outline package; 20 leads;
body width 7.5 mm
SOT163-1
74HC240PW-Q100 40 C to +125 C
74HCT240PW-Q100
TSSOP20 plastic thin shrink small outline package; 20 leads; SOT360-1
body width 4.4 mm
74HC240BQ-Q100 40 C to +125 C
74HCT240BQ-Q100
DHVQFN20 plastic dual-in-line compatible thermal enhanced SOT764-1
very thin quad flat package; no leads; 20 terminals;
body 2.5  4.5  0.85 mm