NTE3094 Datasheet, PDF (2/3 Pages) NTE Electronics – Optoisolator Dual, High Speed, Open Collector NAND Gate

Recommended Operating Conditions:
Parameter
Symbol
Test Conditions
Input Current, Low Level (Each Channel)
Input Current, High Level (Each Channel)
Supply Voltage, Output
Fan Out (TTL Load)
I_FL
I_FH Note 1
V_CC
N
Operating Temperature
T_A
Min Typ Max Unit
0 – 250 µA
6.3 – 15 mA
4.5 – 5.5 V
––8
0 – 70 °C
Note 1. 6.3mA condition permits at least 20% CTR degradation guardband. Initial switching
threshold is 5mA or less.
Electrical Characteristics: (T_A = 0° to +70°C, Note 2 unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
High Level Output Current
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
Input–Output Insulation
Leakage Current
Resistance
Capacitance
Input Forward Voltage
Input Reverse Breakdown
Voltage
I_OH
V_OL
I_CCH
I_CCL
I_IO
R_IO
C_IO
V_F
V_(BR)R
V_CC = 5.V, V_O = 5.5V, I_F = 250µA, Note 3
V_CC = 5.5V, I_F = 5mA, I_OL(sinking) = 13mA, Note 3
V_CC = 5.V, I_F = 0, (Both Channels)
V_CC = 5.V, I_F = 10mA, (Both Channels)
Relative Humidity = 45%, T_A = +25°C, t = 5s,
V_IO = 3000V DC, Note 4
V_IO = 500V, T_A = +25°C, Note 4
f = 1MHz, T_A = +25°C, Note 4
I_F = 10mA, T_A = +25°C, Note 3, Note 5
I_R = 10µA, T_A = +25°C
– 40 250 µA
– 0.4 0.6 V
– 15 30 mA
– 27 36 mA
– – 1.0 µA
– 10¹² –
Ω
– 0.6 – pF
– 1.5 1.75 V
5––
V
Input Capacitance
Current Transfer Ratio
Resistance (Input–Input)
Capacitance (Input–Input)
C_IN
CTR
R_II
C_II
V_F = 0, f = 1MHz, Note 3
I_F = 5mA, R_L = 100Ω, Note 6
V_II = 500V, Note 7
f = 1MHz, Note 7
– 60 – pF
– 700 –
%
– 10¹¹ –
Ω
– 0.27 – pF
Note 2. All typicals at T_A = +25°C, V_CC = 5V unless otherwise specified.
Note 3. Each channel.
Note 4. Measured between Pin1, Pin2, Pin3 and Pin4 shorted together and Pin5, Pin6, Pin7 and
Pin8 shorted together.
Note 5. At 10mA, V_F decreases with increasing temperature at the rate of 1.6mV/°C.
Note 6. DC Current Transfer Ratio is defined as the ratio of the output collector current to the forward
bias input current times 100%.
Note 7. Measured between Pin1 and Pin2 shorted together and Pin3 and Pin4 shorted together.