NTE56028 Datasheet, PDF (1/2 Pages) NTE Electronics – TRIAC, 40 Amp

NTE56028
TRIAC, 40 Amp
Description:
The NTE56028 is a 40 Amp TRIAC is a TO220 type package designed primarily for full–wave AC con-
trol applications such as lighting systems, heater controls, motor controls, and power supplies.
Features:
D Blocking Voltage of 800V
D All Diffused and Glass–Passivated Junctions for Parameter Uniformity and Stability
D Gate Triggering Guaranteed in Four Modes
Absolute Maximum Ratings:
Peak Repetitive Off–State Voltage, V_DRM
(T_J = –40° to +125°C, 1/2 Sine Wave 50 to 60Hz, Gate Open, Note 1) . . . . . . . . . . . . . 800V
On–State RMS Current (T_C = +75°C, Full Cycle Sine Wave 50 to60Hz, Note 2), I_T(RMS) . . . . 40A
Peak Non–Repetitive Surge Current (T_J = +125°C, One Full Cycle, 60Hz), I_TSM . . . . . . . . . . . 350A
Circuit Fusing (t = 8.3ms), I²t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500A²s
Peak Gate Current (t ≤ 2µs), I_GM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2A
Peak Gate Voltage (t ≤ 2µs), V_GM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10V
Peak Gate Power (t ≤ 2µs), P_GM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20W
Average Gate Power (T_C = +75°C, t ≤ 8.3ms), P_G(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5W
Operating Junction Temperature Range, T_J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Thermal Resistance, Junction–to–Case, R_thJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1°C/W
Thermal Resistance, Junction–to–Ambient, R_thJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W
Mounting Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8in. lb.
Note 1. Ratings apply for open gate conditions. Devices shall not be tested with a constant current
source for blocking voltage such that the voltage applied exceeds the rated blocking voltage.
Note 2. This device is rated for use in applications subject to high surge conditions. Care must be
taken to insure proper heat sinking when the device is to be used at high sustained currents.