COP888XG Datasheet, PDF (50/53 Pages) National Semiconductor (TI) – 8-Bit CMOS ROM Based Microcontrollers with 4k to 24k Memory, Comparators and USART

Development Support (Continued)
MetaLink COP8-EPU
EPU-8SGx (-1 or -2)
VL 1 = 110V, 2 = 220V; included p/s, 40 pin DIP target
cable, manuals, software, 16/20/28/40 DIP OTP
programming socket; add DM target adapter or OTP
adapter (if needed)
COP8-DM
DM4-COP8-888xG (x = C, M
E, G, H, K) or
DM5-COP8-FGx (15
MHz) or DM4-COP8-SGx
(10 MHz), plus PS-10,
plus DM-COP8/xxx (ie.
28D)
Included p/s (PS-10), target cable of choice (DIP or
PLCC; i.e. DM-COP8/28D), 16/20/28/40 DIP/SO and
44 PLCC programming sockets. Add OTP adapter (if
needed) and target adapter (if needed)
DM Target
Adapters
MHW-CNVxx (xx = 33, 34 L
etc.)
DM target converters for
16DIP/20SO/28SO/44QFP/28CSP; (i.e. MHW-CNV38
for 20 pin DIP to SO package converter)
OTP
Programming
Adapters
MHW-COP8-PGMA-DS L
MHW-COP8-PGMA-44QFP L
For programming 16/20/28 SOIC and 44 PLCC on the
EPU
For programming 44 QFP on any programmer
MHW-COP8-PGMA-28CSP L
For programming 28 CSP on any programmer
IM-COP8
IM-COP8-AD-464 (-220) H
(10 MHz maximum)
Base unit 10 MHz; -220 = 220V; add probe card
(required) and target adapter (if needed); included
software and manuals
IM Probe Card
PC-8884xG28DW-AD-10 M
(x = C, E, G, K)
10 MHz 28 DIP probe card; 2.5V to 6.0V
PC-888xG40DW-AD-10
M
10 MHz 40 DIP probe card; 2.5V to 6.0V
(x = C, E, G, K)
PC-888xG44PW-AD-10
M
10 MHz 44 PLCC probe card; 2.5V to 6.0V
(x = C, E, G, K)
IM Probe Target MHW-SOICxx (xx = 16, L
Adapters
20, 28)
16 or 20 or 28 pin SOIC adapter for probe card
MHW-CONV33
L
44 pin QFP adapter for 44 PLCC probe card
ICU or COP8-EVAL-ICUxx ICU-303
National
COP8-EVAL-ICUSG
L
No power supply
L
No power supply
KKD WCOP8-IDE
WCOP8-IDE
VL Included in EPU and DM
IAR EWCOP8-xx
See summary above
L - H Included all software and manuals
Byte
Craft
COP8C
COP8C
M
Included all software and manuals
Aisys DriveWay COP8 DriveWay COP8
L
Included all software and manuals
OTP Programmers
Contact vendors
L - H For approved programmer listings and vendor
inforamtion go to our OTP support page at:
www.national.com/cop8
Cost: Free; VL =< $100; L = $100 - $300; M = $300 - $1k; H = $1k - $3k; VH = $3k - $5k
www.national.com
50