LMH6624_05 Datasheet, PDF (5/19 Pages) National Semiconductor (TI) – Single/Dual Ultra Low Noise Wideband Operational Amplifier

±6V Electrical Characteristics (Continued)
Unless otherwise specified, all limits guaranteed at T_A = 25˚C, V⁺ = 6V, V^− = −6V, V_CM = 0V, A_V = +20, R_F = 500Ω, R_L =
100Ω. Boldface limits apply at the temperature extremes. See (Note 12).
Symbol
Parameter
Conditions
Min
Typ
Max
(Note 6) (Note 5) (Note 6)
Units
I_SC
Output Short Circuit Current (LMH6624)
Sourcing to Ground
100
156
85
∆V_IN = 200mV (Note 3), (Note 11)
(LMH6624)
100
156
Sinking to Ground
85
∆V_IN = −200mV (Note 3), (Note 11)
mA
(LMH6626)
65
120
Sourcing to Ground
55
∆V_IN = 200mV (Note 3), (Note 11)
(LMH6626)
65
120
Sinking to Ground
55
∆V_IN = −200mV (Note 3), (Note 11)
I_OUT
Output Current
(LMH6624)
Sourcing, V_O = +4.3V
Sinking, V_O = −4.3V
(LMH6626)
100
mA
80
Sourcing, V_O = +4.3V
Sinking, V_O = −4.3V
Power Supply
PSRR
Power Supply Rejection Ratio V_S = ±5.4V to ±6.6V
82
88
dB
80
I_S
Supply Current (per channel) No Load
12
16
mA
18
Note 1: Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2: Human body model, 1.5kΩ in series with 100pF.
Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150˚C.
Note 4: The maximum power dissipation is a function of T_J(MAX), θ_JA, and T_A. The maximum allowable power dissipation at any ambient temperature is
P_D = (T_J(MAX) - T_A)/ θ_JA . All numbers apply for packages soldered directly onto a PC board.
Note 5: Typical Values represent the most likely parametric norm.
Note 6: All limits are guaranteed by testing or statistical analysis.
Note 7: Average drift is determined by dividing the change in parameter at temperature extremes into the total temperature change.
Note 8: Slew rate is the slowest of the rising and falling slew rates.
Note 9: Machine Model, 0Ω in series with 200pF.
Note 10: Simulation results.
Note 11: Short circuit test is a momentary test. Output short circuit duration is 1.5ms.
Note 12: Electrical table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of
the device such that T_J = T_A. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where T_J > T_A.
Absolute maximum ratings indicate junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically.
Ordering Information
Package
SOT23-5
SOIC-8
SOIC-8
MSOP-8
Part Number
LMH6624MF
LMH6624MFX
LMH6624MA
LMH6624MAX
LMH6626MA
LMH6626MAX
LMH6626MM
LMH6626MMX
Package Marking
A94A
LMH6624MA
LMH6626MA
A98A
Transport Media
1k Units Tape and Reel
3k Units Tape and Reel
95 Units/Rail
2.5k Units Tape and Reel
95 Units/Rail
2.5k Units Tape and Reel
1k Units Tape and Reel
3.5k Units Tape and Reel
NSC Drawing
MF05A
M08A
M08A
MUA08A
5
www.national.com