LM3410_08 Datasheet, PDF (5/32 Pages) National Semiconductor (TI) – PowerWise® 525kHz/1.6MHz, Constant Current Boost and SEPIC LED Driver with Internal Compensation

Symbol
θ_JA
θ_JC
T_SD
Parameter
Conditions
Junction to Ambient
0 LFPM Air Flow (Note 3)
LLP-6 and eMSOP-8 Package
SOT23-5 Package
Junction to Case (Note 3)
LLP-6 and eMSOP-8 Package
SOT23-5 Package
Thermal Shutdown Temperature (Note 2)
Min Typ Max Units
-
80
-
°C/W
- 118 -
-
18
-
°C/W
-
60
-
- 165 -
°C
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but does not guarantee specific performance limits. For guaranteed specifications and conditions, see the Electrical Characteristics.
Note 2: Thermal shutdown will occur if the junction temperature exceeds the maximum junction temperature of the device.
Note 3: Applies for packages soldered directly onto a 3” x 3” PC board with 2oz. copper on 4 layers in still air.
Note 4: The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. Test method is per JESD22-A114.
Note 5: Do not allow this pin to float or be greater than V_IN +0.3V.
5
www.national.com