LMK03002C_14 Datasheet, PDF (4/28 Pages) National Semiconductor (TI) – Precision Clock Conditioner with Integrated VCO

LMK03002C EVALUATION BOARD OPERATING INSTRUCTIONS
Read first, Basic Operation
Read the document, “Installing CodeLoader 4 & USB Driver” for instructions to prepare the computer
for usage with the evaluation board before continuing with the hardware setup.
For basic operation…
1. Connect a low noise 3.3 V power supply to the Vcc connector located at the top left of the
board
2. Connect the CodeLoader cable to the uWire header located in the lower left.
4