LMK03002C_14 Datasheet, PDF (18/28 Pages) National Semiconductor (TI) – Precision Clock Conditioner with Integrated VCO

LMK03002C EVALUATION BOARD OPERATING INSTRUCTIONS
VCO Phase Noise – Narrow Loop Bandwidth
This plot shows the noise of the VCO at 1632 MHz using a 500 kHz Phase
Detector Frequency. An external oscillator was used for this plot, since the VCO
noise dominates, reference oscillator noise is not critical.
The loop bandwidth has been minimized so that the VCO is the dominant noise
contributor.
10 Hz – 20 MHz integrated RMS jitter = 107.6 ps
100 Hz – 20 MHz integrated RMS jitter = 28.1 ps (shown)
1 kHz – 20 MHz integrated RMS jitter = 2.7 ps
12 kHz – 20 MHz integrated RMS jitter = 0.303 ps
18