LMC6035 Datasheet, PDF(4/20 Page) National Semiconductor (TI) – Low Power 2.7V Single Supply CMOS Operational Amplifiers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

LMC6035 Datasheet, PDF (4/20 Pages) National Semiconductor (TI) – Low Power 2.7V Single Supply CMOS Operational Amplifiers

◁

AC Electrical Characteristics (Continued)

Unless otherwise specified, all limits guaranteed for TJ = 25ËC, V+ = 2.7V, Vâ = 0V, VCM = 1.0V, V O = 1.35V and RL > 1 Mâ¦.

Boldface limits apply at the temperature extremes.

Symbol

Parameter

Conditions

Typ

Units

V + = 10V

(Note 5)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.

Note 2: Human body model, 1.5kâ¦ in series with 100pF.

Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the

maximum allowed junction temperature of 150ËC. Output currents in excess of 30mA over long term may adversely affect reliability.

Note 4: The maximum power dissipation is a function of TJ(MAX), Î¸JA, and TA. The maximum allowable power dissipation at any ambient temperature is

PD = (TJ(MAX) âTA)/Î¸ JA. All numbers apply for packages soldered directly onto a PC board with no air flow.

Note 5: Typical Values represent the most likely parametric norm or one sigma value.

Note 6: All limits are guaranteed by testing or statistical analysis.

Note 7: V+ = 15V, VCM = 7.5V and R L connected to 7.5V. For Sourcing tests, 7.5V â¤ VO â¤ 11.5V. For Sinking tests, 3.5V â¤ VO â¤ 7.5V.

Note 8: Do not short circuit output to V+ when V+ is greater than 13V or reliability will be adversely affected.

Note 9: V+ = 15V. Connected as voltage follower with 10V step input. Number specified is the slower of the positive and negative slew rates.

Note 10: Input referred, V + = 15V and RL = 100kâ¦ connected to 7.5V. Each amp excited in turn with 1kHz to produce VO = 12 VPP.

Note 11: Guaranteed by design.

www.national.com

▷