MV54ACTQ541-X Datasheet, PDF (3/7 Pages) National Semiconductor (TI) – Octal Buffer/Line Driver with TRI-STATE Outputs

MV54ACTQ541-X REV 0A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc)
DC Input Diode Current (Iik)
Vi = -0.5V
Vi = Vcc +0.5V
DC Input Voltage (Vi)
DC Output Diode Current (Iok)
Vo = -0.5V
Vo = Vcc +0.5V
DC Output Voltage (Vo)
DC Output Source or Sink Current (Io)
DC Vcc or Ground Current per Output Pin (Icc or Ignd)
Storage Temperature (Tstg)
DC Latch-Up Source or Sink Current
Junction Temperature (Tj)
Thermal Resistance, junction-to-case (jc)
Maximum Power Dissipation (pd)
Lead Temperature
soldering, 10 seconds
-0.5V to +7.0V
-20 mA
+20 mA
-0.5V to Vcc +0.5V
-20 mA
+20 mA
-0.5V to Vcc +0.5V
+50 mA
+50 mA
-65 C to +150 C
+300 mA
175 C
see Mil-Std 1835
500 mW
+300 C
Note 1:
Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
Supply Voltage (Vcc)
Input Voltage (Vi)
Output Voltage (Vo)
Minimum Input Edge Rate Delta V/Delta T
ACTQ Devices
Vin from 0.8V to 2.0V
Vc @ 4.5V, 5.5V
Operating Temperature (ta)
Maximum High Level Output Current (Ioh)
Maximum Low Level Output Current (Iol)
4.5V to 5.5V
0V to Vcc
0V to Vcc
125 mV/ns
-55 C to +125 C
-24 mA
+24 mA
3