DS96F173M Datasheet, PDF (3/10 Pages) National Semiconductor (TI) – Quad Differential Receivers

Switching Characteristics (Continued)
V_CC = 5.0V, T_A = 25˚C
Symbol
Parameter
Conditions
Min Typ Max Units
t_LZ
|t_PLH– t_PHL|
Output Disable Time from Low Level
Pulse Width Distortion (SKEW)
C_L = 5.0 pF, Figure 3
Figure 1
14
18
ns
1.0
3.0
ns
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
Note 3: Unless otherwise specified min/max limits apply across the 0˚C to +70˚C range for the DS96F175C. All typicals are given for V_CC = 5V and T_A = 25˚C.
Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwise specified.
Note 5: The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common mode input voltage
and threshold voltage levels only.
Note 6: Hysteresis is the difference between the positive-going input threshold voltage. V_TH, and the negative going input threshold voltage, V_TL.
Note 7: Refer to EIA-485 Standard for exact conditions.
Note 8: Only one output at a time should be shorted.
Order Number: DS96F175CJ
See NS Package Number J16A
3
www.national.com