DS90CR581 Datasheet, PDF (3/10 Pages) National Semiconductor (TI) – LVDS Transmitter 24-Bit Color Flat Panel Display (FPD) Link

Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit
Duration
−0.3 to +6V
−0.3 to (V_CC + 0.3V)
−0.3 to (V_CC + 0.3V)
continuous
Junction Temperature
+150˚C
Storage Temperature Range
−65˚C to +150˚C
Lead Temperature
(Soldering, 4 sec.)
+260˚C
Maximum Package Power Dissipation @ +25˚C
MTD56 (TSSOP) Package:
DS90CR581
1.63W
Package Derating:
DS90CR581
12.5 mW/˚C above
+25˚C
This device does not meet 2000V ESD rating. (Note 4)
Recommended Operating
Conditions
Supply Voltage (V_CC)
Operating Free
Air Temperature (T_A)
Receiver Input Range
Supply Noise Voltage (V_CC)
Min Nom Max Units
4.5 5.0 5.5
V
−10 +25 +70 ˚C
0
2.4
V
100 mV_P-P
Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol
Parameter
CMOS/TTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
I_OS
Output Short Circuit Current
LVDS DRIVER DC SPECIFICATIONS
V_OD
∆V_OD
Differential Output Voltage
Change in V_OD between
Complimentary Output States
V_OS
∆V_OS
Offset Voltage (Note 5)
Change in V_OS between
Complimentary Output States
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
I_OS
Output Short Circuit Current
I_OZ
Output TRI-STATE^® Current
TRANSMITTER SUPPLY CURRENT
I_CCTW
Transmitter Supply Current,
Worst Case
I_CCTG
Transmitter Supply Current,
16 Grayscale
I_CCTZ
Transmitter Supply Current,
Power Down
Conditions
Min Typ Max Units
I_CL = −18 mA
V_IN = V_CC, GND, 2.5V or 0.4V
V_OUT = 0V
R_L = 100Ω
2.0
GND
V_CC
V
0.8
V
−0.79 −1.5
V
±5.1 ±10
µA
−120 mA
250
290
450
mV
35
mV
1.1
1.25 1.375
V
35
mV
V_OUT = 0V, R_L = 100Ω
Power Down = 0V, V_OUT = 0V or V_CC
1.3
1.6
V
0.9 1.01
V
−2.9
−5
mA
±1
±10
µA
R_L = 100Ω, C_L = 5 pF,
Worst Case Pattern
(Figure 1, Figure 2)
R_L = 100Ω, C_L = 5 pF,
Grayscale Pattern
(Figure 2, Figure 3)
Power Down = Low
f = 32.5 MHz
f = 37.5 MHz
f = 32.5 MHz
f = 37.5 MHz
34
51
mA
36
53
mA
27
47
mA
28
48
mA
1
25
µA
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the device
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Typical values are given for V_CC = 5.0V and T_A = +25˚C.
Note 3: Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground unless otherwise speci-
fied (except V_OD and ∆V_OD).
Note 4: ESD Rating: HBM (1.5 kΩ, 100 pF)
PLL V _CC ≥ 1000V
All other pins ≥ 2000V
EIAJ (0Ω, 200 pF) ≥ 150V
Note 5: V_OS previously referred as V_CM
3
www.national.com