|
DS8838 Datasheet, PDF (3/5 Pages) National Semiconductor (TI) – Quad Unified Bus Transceiver | |||
|
◁ |
Absolute Maximum Ratings (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Molded DIP Package: 1362 mW
SO Package: 1002 mW
Operating Conditions
Supply Voltage
Input and Output Voltage
Storage Temperature Range
Lead Temperature, (Soldering, 4 sec.)
7V
5.5V
â65ËC to +150ËC
260ËC
Maximum Power Dissipation (Note 1) at 25ËC
Operating Temperature Range
Supply Voltage (VCC)
0ËC to +70ËC
4.75V ⤠VCC ⤠5.25V
Note 1: Derate cavity package 9.6 mW/ËC above 25ËC; derate molded DIP
package 10.9 mW/ËC above 25ËC; derate SO package 8.01 mW/ËC above
25ËC.
Cavity Package: 1433 mW
Electrical Characteristics
The following apply for VMIN ⤠VCC ⤠VMAX, TMIN ⤠TA ⤠TMAX, unless otherwise specified (Notes 3, 4)
Symbol
Parameter
Conditions
Min Typ Max Units
DRIVER AND DISABLE INPUTS
VIH
Logical â1â Input Voltage
VIL
Logical â0â Input Voltage
II
Logical â1â Input Current
IIH
Logical â1â Input Current
IIL
Logical â0â Input Current
VCL
Input Diode Clamp Voltage
DRIVER OUTPUT/RECEIVER INPUT
2.0
V
0.8
V
VIN = 5.5V
VIN = 2.4V
VIN = 0.4V
IDIS = â12 mA, IIN = â12 mA, IBUS = â12 mA,
TA = 25ËC
1
mA
40
µA
â1.6 mA
â1 â1.5
V
VOLB
IIHB
IILB
VIH
Low Level Bus Voltage
Maximum Bus Current
Maximum Bus Current
High Level Receiver Threshold
VDIS = 0.8V, VIN = 2V, IBUS = 50 mA
VIN = 0.8V, VBUS = 4V, VCC = VMAX
VIN = 0.8V, VBUS = 4V, VCC = 0V
VIND = 0.8V, IOL = 16 mA, VCC =
Max
0.4 0.7
V
20
100
µA
2
100
µA
1.80 2.25 2.50
V
VIL
Low Level Receiver Threshold
RECEIVER OUTPUT
VIND = 0.8V, VOH = â400 µA, VCC = Min
1.05 1.30 1.55
V
VOH
Logical â1â Output Voltage
VOL
Logical â0â Output Voltage
IOS
Output Short Circuit Current
ICC
Supply Current
tpd
Propagation Delays (Note 9)
Disable to Bus â1â
VIN = 0.8V, VBUS = 0.5V, IOH = â400 µA
VIN = 0.8V, VBUS = 4V, IOL = 16 mA
VDIS = 0.8V, VIN = 0.8V, VBUS = 0.5V,
VOS = 0V, VCC = VMAX, (Note 5)
VDIS = 0V, VIN = 2V, (Per Package)
(Note 6)
2.4
V
0.25 0.4
V
â18
â55 mA
50
70
mA
19
30
ns
Disable to Bus â0â
(Note 6)
15
23
ns
Driver Input to Bus â1â
(Note 6)
17
25
ns
Driver Input to Bus â0â
(Note 6)
9
15
ns
Bus to Logical â1â Receiver
Output
(Note 7)
20
30
ns
Bus to Logical â0â Receiver
Output
(Note 8)
18
30
ns
Note 2: âAbsolute Maximum Ratingsâ are those values beyond which the safety of the device cannot be guaranteed. Except for âOperating Temperature Rangeâ they
are not meant to imply that the devices should be operated at these limits. The table of âElectrical Characteristicsâ provides conditions for actual device operation.
Note 3: Unless otherwise specified min/max limits apply across the â55ËC to +125ËC temperature range for the DS7838 and across the 0ËC to +70ËC range for the
DS8838. All typical values are for TA = 25ËC and VCC = 5V.
Note 4: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown
as max or min on absolute value basis.
Note 5: Only one output at a time should be shorted.
Note 6: 91⦠from bus pin to VCC and 200⦠from bus pin to ground, CLOAD = 15 pF total. Measured from VIN = 1.5V to VBUS = 1.5V, VIN = 0V to 3.0V pulse.
Note 7: Fan-out of 10 load, CLOAD = 15 pF total. Measured from VIN = 1.3V to VOUT = 1.5V, VIN = 0V to 3.0V pulse.
Note 8: Fan-out of 10 load, CLOAD = 15 pF total. Measured from VIN = 2.3V to VOUT = 1.5V, VIN = 0V to 3.0V pulse.
Note 9: These apply for VCC = 5V, TA = 25ËC unless otherwise speicified.
3
www.national.com
|
▷ |