English
Language : 

LP38853 Datasheet, PDF (1/18 Pages) Texas Instruments – LP38853 3A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Start
December 2006
LP38853
3A Fast-Response High-Accuracy Adjustable LDO Linear
Regulator with Enable and Soft-Start
General Description
The LP38853-ADJ is a high current, fast response regulator
which can maintain output voltage regulation with extremely
low input to output voltage drop. Fabricated on a CMOS pro-
cess, the device operates from two input voltages: VBIAS
provides voltage to drive the gate of the N-MOS power tran-
sistor, while VIN is the input voltage which supplies power to
the load. The use of an external bias rail allows the part to
operate from ultra low VIN voltages. Unlike bipolar regulators,
the CMOS architecture consumes extremely low quiescent
current at any output load current. The use of an N-MOS
power transistor results in wide bandwidth, yet minimum ex-
ternal capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable
for use in powering DSP, Microcontroller Core voltages and
Switch Mode Power Supply post regulators. The part is avail-
able in PSOP 8–pin, TO-220 7–pin, and TO-263 7-pin pack-
ages.
Dropout Voltage: 240 mV (typical) at 3A load current.
Low Ground Pin Current: 10 mA (typical) at 3A load current.
Soft-Start: Programmable Soft-Start time.
Precision ADJ Voltage: ±1.5% for TJ = 25°C, and ±2.0% for
0°C ≤ TJ ≤ +125°C, across all line and load conditions
Features
■ Adjustable VOUT range of 0.80V to 1.8V
■ Wide VBIAS Supply operating range of 3.0V to 5.5V
■ Stable with 10µF Ceramic capacitors
■ Dropout voltage of 240 mV (typical) at 3A load current
■ Precision VADJ across all line and load conditions:
— ±1.5% VADJ for TJ = 25°C
— ±2.0% VADJ for 0°C ≤ TJ ≤ +125°C
— ±3.0% VADJ for -40°C ≤ TJ ≤ +125°C
■ Over-Temperature and Over-Current protection
■ Available in 8 lead PSOP, 7 lead TO-220 and 7 lead
TO-263 packages
■ −40°C to +125°C Operating Junction Temperature Range
Applications
■ ASIC Power Supplies in:
- Desktops, Notebooks, and Graphics Cards, Servers
- Gaming Set Top Boxes, Printers and Copiers
■ Server Core and I/O Supplies
■ DSP and FPGA Power Supplies
■ SMPS Post-Regulator
Typical Application Circuit
© 2006 National Semiconductor Corporation 201310
20131001
www.national.com