LMC6042 Datasheet, PDF (1/13 Pages) National Semiconductor (TI) – CMOS Dual Micropower Operational Amplifier

August 1999
LMC6042
CMOS Dual Micropower Operational Amplifier
General Description
Ultra-low power consumption and low input-leakage current
are the hallmarks of the LMC6042. Providing input currents
of only 2 fA typical, the LMC6042 can operate from a single
supply, has output swing extending to each supply rail, and
an input voltage range that includes ground.
The LMC6042 is ideal for use in systems requiring ultra-low
power consumption. In addition, the insensitivity to latch-up,
high output drive, and output swing to ground without requir-
ing external pull-down resistors make it ideal for
single-supply battery-powered systems.
Other applications for the LMC6042 include bar code reader
amplifiers, magnetic and electric field detectors, and
hand-held electrometers.
This device is built with National’s advanced Double-Poly
Silicon-Gate CMOS process.
See the LMC6041 for a single, and the LMC6044 for a quad
amplifier with these features.
Features
n Low supply current: 10 µA/Amp (typ)
n Operates from 4.5V to 15V single supply
n Ultra low input current: 2 fA (typ)
n Rail-to-rail output swing
n Input common-mode range includes ground
Applications
n Battery monitoring and power conditioning
n Photodiode and infrared detector preamplifier
n Silicon based transducer systems
n Hand-held analytic instruments
n pH probe buffer amplifier
n Fire and smoke detection systems
n Charge amplifier for piezoelectric transducers
Connection Diagram
8-Pin DIP/SO
Ordering Information
Package
8-Pin
Small Outline
8-Pin
Molded DIP
Temperature
Range
Industrial
−40˚C to +85˚C
LMC6042AIM
LMC6042IM
LMC6042AIN
LMC6042IN
NSC
Drawing
M08A
N08E
DS011137-1
Transport
Media
Rail
Tape and Reel
Rail
© 1999 National Semiconductor Corporation DS011137
www.national.com