LM3712 Datasheet, PDF (1/13 Pages) National Semiconductor (TI) – Microprocessor Supervisory Circuits with Separate Watchdog Timer Output, Power Fail Input and Manual Reset

July 2002
LM3712/LM3713
Microprocessor Supervisory Circuits with Separate
Watchdog Timer Output, Power Fail Input and Manual
Reset
General Description
The LM3712/LM3713 series of microprocessor supervisory
circuits provide the maximum flexibility for monitoring power
supplies and battery controlled functions in systems without
backup batteries. The LM3712/LM3713 series are available
in a 9-bump micro SMD package.
Built-in features include the following:
Reset: Reset is asserted during power-up, power-down, and
brownout conditions. RESET is guaranteed down to V_CC of
1.0V.
Manual Reset Input: An input that asserts reset when pulled
low.
Power-Fail Input: A 1.225V threshold detector for power fail
warning, or to monitor a power supply other than V_CC.
Watchdog Timer: The WDI (Watchdog Input) monitors one of
the µP’s output lines for activity. If no output transition occurs
during the watchdog timeout period, the watchdog output
(WDO) pulls low.
Features
n Standard Reset Threshold voltage: 3.08V
n Custom Reset Threshold voltages: For other voltages
between 2.2V and 5.0V in 10mV increments, contact
National Semiconductor Corp.
n No external components required
n Manual-Reset input
n RESET (LM3712) or RESET (LM3713) outputs
n Precision supply voltage monitor
n Factory programmable Reset and Watchdog Timeout
Delays
n Separate Watchdog output
n Separate Power Fail comparator
n Available in micro SMD package for minimum footprint
n ±0.5% Reset threshold accuracy at room temperature
n ±2% Reset threshold accuracy over temperature
extremes
n Reset assertion down to 1V V_CC (RESET option only)
n 28 µA V_CC supply current
Applications
n Embedded Controllers and Processors
n Intelligent Instruments
n Automotive Systems
n Critical µP Power Monitoring
Typical Application
© 2002 National Semiconductor Corporation DS200119
20011903
www.national.com